FLEET OVERWATCH User manualVersion 4.9.2

Release notes: 4.9.2

Version 4.9.2Updated 2026-11-20Who: Everyone

Version 4.9.2 (November 2026). Prepared by Franko.

Shop and vendor map (new, Shops and vendors › Shop and vendor map; separate from the main live map)

  • Your shops and vendors on one map, each location too, by kind (repair, parts, tires, towing and roadside, mobile, fuel, dealerships, your own shops). It shows preferred, conditional, pending and suspended status, open now or closed, and service radius circles. A dashed line joins each truck to the outside shop working on it.
  • Businesses nearby, with phone numbers: parts stores, gas and diesel, truck stops, repair shops, tire shops and towing. Listings come from OpenStreetMap (free, on by default), TomTom (with your TomTom key) and Google Places (with a Google key). Google listings show on a Google map, as Google requires; the key stays on the server. A daily limit keeps Google costs in check.
  • Trucks live: they move every second from the same data as the live map, with filters (moving, stopped, in the shop or down, no repair shop within a distance you choose).
  • Filters: search, kinds, status, service, rating, open now, working on our trucks, and hide single vendors. Filters are remembered on each device.
  • Nearest: click a truck for the nearest repair shops, parts stores, fuel, tires or towing, with distance and phone. Right-click or long-press anywhere for what is nearest to that spot, and the nearest trucks.
  • Actions: directions, call, open the shop's profile, new work order for a truck at a shop, and add an OpenStreetMap listing to your directory. The list in view can be saved as CSV.
  • Map positions from addresses: shops and locations with a street address but no latitude and longitude are now placed on the map on their own (a few every 10 minutes), or press Find on map.

Version 4.9.1 (November 2026). Prepared by Franko.

Shops and vendors directory (new, Maintenance › Shops and vendors)

  • Your own shops and outside vendors in one directory: shop codes, internal or external, statuses (Pending approval, Approved, Preferred, Conditional, Suspended, Do not use, Archived) with an approval workflow and required reasons.
  • Several locations per shop, contacts by role, hours and after-hours, temporarily closed; services from a list you can change, equipment it can work on, amenities.
  • Map with service radius, and Near me. Preferred shops first; filters and columns remembered.
  • Work orders: pick a shop from the directory; blocked shops cannot be used, Conditional shops need a manager (recorded), and the shop's details at that moment are saved on the work order. Repair category, estimate and the shop's own progress on the work order.
  • Profile with repairs, purchase orders, bills, spending, automatic metrics (average cost, turnaround, comebacks, warranty returns) and employee ratings.
  • Documents with expiry warnings (and optional automatic Conditional or Suspended).
  • Vendor portal: invite a shop by a private link; they post progress, estimates, completion, invoices and documents, and ask for changes you approve.
  • Analytics, CSV/Excel/PDF export, import with column matching, preview and duplicate checks (never merged on their own), a history of every change, and a role-by-role permission table.

Maintenance timers

  • Bulk actions: tick timers to snooze, mark done, open work orders, assign alerts, change the due-soon window, pause, resume or delete.
  • Due-soon and overdue alerts by in-app notice, email, text message (Twilio) and phone push (ntfy), repeated until done.

Server backups: server administrators can delete an old backup (not the newest one) after typing its name.

Fits every screen: wide tables scroll inside their box on phones, pictures and videos stay inside the screen, and the new pages are checked on a computer, a 4K screen and a phone.

Version 4.9.0 (November 2026). Prepared by Franko.

Every screen size

  • Phones, tablets, laptops, 1080p, 1440p, ultrawide and 4K: on very large screens the pages, menu, dialogs and the work order screen scale up so they read like a normal desktop and fill the width (the live map stays sharp). Pages no longer stop at a fixed width.
  • The work order screen lines up at every width: its fields reflow (4, 3, 2 or 1 per row) by the space they have, the side column moves under the work on smaller screens, tasks go two across on wide screens, and the header stacks neatly on phones.

Cleaner menu and a real home page

  • Today (top of the menu for the office): what needs attention (units down, critical issues, service past due, job conflicts, rentals due back, low parts, warranty claims), jobs and transport moves today, units down, money at stake, and one-tap New work order, New job, Report a problem and New transport move.
  • The sidebar's display, sound and panel controls fold into one Display, sound and panels line; system status folds to one line (click to open).

Dispatch for trucks and heavy equipment (new)

  • Job sites, Jobs (a truck or machine and its operator on a job site for a time), Transport moves (lowboy moves with the hauling truck, driver, oversize permit) and Rentals (rented in from a vendor or out to a customer, by the hour, day, week or month, with the amount worked out).
  • Schedule board: every truck and machine by day with its jobs, moves, shop time and rentals. Drag a job to another unit or day; conflicts (double-booked machine or operator, in the shop, open work order, service past due, rented out) are checked each time and shown in red.
  • Utilization: hours booked on jobs and engine hours worked against the hours available, and days in the shop.
  • Bill a job: a job's hours become a draft invoice for the customer in one click.
  • My day for drivers and operators: their jobs with directions and site notes, transport moves (oversize flagged), start inspection, report a problem, and the problems they reported (shown Fixed when done).

Heavy equipment

  • OEM telematics (ISO 15143-3 / AEMP 2.0): CAT VisionLink, John Deere JDLink, Komatsu Komtrax, Volvo CareTrack and other standard feeds. Engine hours (and miles) are recorded every 30 minutes, machines matched by serial number, PIN/VIN or unit name; machines not in the fleet are listed. Feed passwords are kept on the server and never shown back.

Run without Fleetio

  • Fleet setup › Run without Fleetio: what is here and what came from Fleetio, a short checklist, and one switch that stops the Fleetio sync for good (and can switch it back on).

Running the server by yourself

  • Morning briefing to admins and managers at the hour you choose (notice, and email if switched on).
  • Push to your phone: server alerts go to the free ntfy app (Command Center › Notifications and alerts › Push to my phone).
  • Weekly server summary every Monday morning (issues, backups, disk, version) by email and push. This adds to the off-site backups, practice restores, automatic repair and Command Center that were already there.

Version 4.8.29 (November 2026). Prepared by Franko.

Fixes

  • Work order status is a real dropdown with only the statuses Fleet OverWatch tracks work by: Open, Pending, In Progress, Waiting on Parts, On Hold, Completed, Cancelled (what each means shows beside it). Statuses copied in from Fleetio show on old work orders until one is chosen.
  • Last recorded miles show as soon as a truck is picked: in the new work order window (large, with its source and time), on the work order screen (filled in when the odometer is empty) and in the full form (under the odometer box, with use it).
  • New work order window fits any screen: a search list instead of a floating dropdown, scrolls inside, the buttons always show; full screen on phones.

Shop intelligence (new)

  • Known fixes: a fault code shows what fixed it before, from your own work orders: this truck, the same make and model, then the fleet, with hours, cost and parts. On the work order screen and on each fault (Known fixes tab).
  • Warranty recovery: parts and repairs carry warranty days and miles (from the part, or set on the line). Redoing one on the same truck inside its warranty opens a warranty claim by itself and alerts the shop; the work order screen says so before you finish. Track claims from Possible to Filed, Paid or Denied.
  • Comebacks: the same truck back for the same task, part or fault code within 30 days (you choose) is recorded, with rates by technician, vendor and part brand.
  • Downtime in dollars: each truck's revenue per day (or the company's). Every open work order shows what it has cost so far; Money at stake lists them largest first.
  • Keep or replace: maintenance cost per mile against a new truck's (price, value at the end, life miles, maintenance when new), the point where replacing is cheaper and the saving a year.
  • Vendor scorecards: grade, jobs, spend, turnaround, comebacks and price against doing the same task in-house.
  • Core deposits: a part with a core deposit starts as Owed on the work order; mark Returned, Credited or Kept; totals of what is owed back.
  • Fuel location check: every hour, fuel purchases are checked against where Samsara says the truck was; fuel bought in another state is flagged for review.
  • Tire forecast: wear per 1,000 miles from inspections, miles and date until the replace-at tread.
  • Ask your fleet: plain-English questions ("which trucks cost the most per mile this year?", "any warranty claims?") answered from your records with a table. If your company's AI assistant is switched on it may help understand the wording; it never sees your data.

Shop floor

  • Bay board: a TV view of every bay: truck, who is on the clock and for how long, tasks done, waiting on parts. Full screen with TV; updates every 30 seconds. Put a work order in a bay with the new Bay box.
  • Scan to clock in: scanning a work order's QR code asks the technician which task they are starting and starts their time. Start my time / Pause / Stop on every task. Stopped timers become that technician's hours on the task.
  • Voice notes: the microphone beside a task's comment box turns speech into text (or saves a recording on the task where the browser cannot).
  • Works without Wi-Fi: on the work order screen, changes made with no connection are kept on the device and sent when it is back.

Drivers and compliance

  • Driver told it is fixed: when a work order fixes an issue, the driver who reported it gets a notice (and, if switched on, a Samsara message).
  • DOT audit packet: one printer-friendly PDF per truck for an auditor: the truck, renewals, inspections, roadside inspections, defects and repairs for 6 to 36 months, open defects today, signature lines (Vehicles › the truck › actions).

Version 4.8.28 (November 2026). Prepared by Franko.

The work order screen

  • Opening a work order (from the list, a QR code, an alert or a link) opens a full, tidy work order screen instead of the side panel. More › Classic view keeps the panel with every other tab (Fleetio, Time, Photos).
  • Status button: one click opens the statuses; choosing one saves it at once. Completed asks for the odometer out (refused when it is below the odometer in) and then uses the parts, resolves the issues, writes the history and resets the reminders. Errors show where you clicked.
  • New work order: scan the truck or asset (camera or handheld scanner: QR code, barcode, VIN, plate or unit number) or type it; the work order opens ready for work with the last odometer filled in. Use the full form instead keeps the old form.
  • Odometer: under the Odometer in box, the last recorded reading (Samsara first, then the meter history, then the vehicle) with its time and a use it button.
  • Add work in four tabs: Service tasks (search and tick several), Due services (past due and due for this vehicle), Active issues (add them, or Clear one with a note), Custom task.
  • Each task has its own technicians with the hours each spent (labor worked out from each one's rate, counted once), parts with prices, notes, comments, and photos or PDFs.
  • Outside vendor service is hidden until switched on (on by itself when the work order has a vendor): vendor, invoice and PO numbers, outside charges, and the vendor's invoice PDF.
  • Costs: labor (with hours), parts, outside vendor, subtotal, discount, tax and grand total, worked out as you go. A switch applies the company's default tax; admins and managers set it (name, percent, and whether new work orders take it by themselves) with Default tax….
  • QR code: every work order has its own (in the header, on the side, on labels and on the PDF); scanning it opens the work order.
  • Follow-ups and alerts: a timer to come back and check a repair (tomorrow, 3 days, a week, or any time), and a watch that alerts the shop if a fault code comes back on that vehicle (from Samsara or entered by hand) within 30 days to a year. Alerts go to admins, managers, shop users and whoever set it.
  • Export PDF: a professional one- or more-page work order (company, number, status, QR code, vehicle, tasks with technicians and hours, parts with prices, outside vendor, totals, signature lines), in color or printer friendly (black on white, no filled bars or shaded rows). Print uses the printer-friendly version.
  • Works on phones: the screen takes the whole screen and stacks into one column.

Resizable columns

  • Every record list (work orders, issues, vehicles and the rest) and the tables on the work order screen: drag the edge of a column heading to make it wider or narrower; double-click the edge to go back to automatic. Widths are remembered on this device.

Version 4.8.27 (November 2026). Prepared by Franko.

Fleetio work orders: everything, and up to date

  • Work orders are read at Fleetio's current address (/work_orders; the /v1 one is deprecated), newest first. Quick passes ask only for those changed since the last list (with an hour to spare); the daily full pass reads them all.
  • A new or changed work order is read in full from its own record: tasks, parts, technicians and their hours, comments, repair priority, tax, the issues it fixes (linked to it), and its photos and documents (copied into the work order's files once).
  • Every earlier work order is read once in full the same way, newest first (a few each pass; all at once with Sync work orders).
  • Each work order has a Fleetio tab: Read this work order from Fleetio now copies it immediately and shows Fleetio's numbers next to the ones here (tasks, parts, hours, money, comments, files, issues), with every column of the export file if it was imported.
  • A timeout or Fleetio not answering ("parts: Timeout: SSL connection timeout", "part_stock: HTTP 521") is asked again after 5, 15, 30 and 60 seconds instead of stopping the list; if Fleetio stays down, the rest of the pass does not wait again.
  • A list Fleetio refuses the API key (403, such as equipment) is asked again once a day (and on Sync now), not every pass.

Fleetio work order export (the 63-column file)

  • Imports cleanly: Summary is used when Description is empty, Created By when Issued By is empty, Assigned To first and last names are joined, dates are taken in the time zone the column names, Duration becomes downtime, and watchers, warranty credits, markups, labor hours and parts quantity go into the notes.
  • Every column of each row is kept with the work order (Data from Fleetio, and the Fleetio tab).
  • Work orders are matched by Fleetio ID (then number): importing the same file again changes nothing twice, and a work order the sync already made is updated, never copied, and keeps Fleetio's own lines. With Fleetio connected the sync then reads every imported work order in full.

Version 4.8.26 (November 2026). Prepared by Franko.

Fleetio work orders up to date

  • Work order lines (tasks, parts, technicians and their hours) are read from the work order itself (/work_orders/:id). The program used to ask Fleetio at /v1/work_orders/:id/work_order_line_items, an address Fleetio does not answer, so those work orders were skipped ("Skipped (the API key cannot read them) ...") and marked as read with no lines. Every such work order is now read once more, in full.
  • Work orders are asked for newest first, so a pass that is cut short still brings today's work.
  • A list Fleetio offers only at another address (for example equipment at /equipment, not /v1/equipment) is read there; the address that works is remembered.
  • The "Skipped" note is grouped (one line per kind, with the count) and says why: not allowed for the API key (403) or not offered on the account (404).

Browser compatibility

  • Copying uses the Clipboard API; print windows (work orders, DVIRs, reports, labels, pick lists) are built with the DOM instead of document.write; word-break: break-word replaced by overflow-wrap: anywhere.
  • The check no longer counts: CSS.escape() as escape(), -webkit-box used for line clamping, features every supported browser has (Chrome and Edge 120+, Firefox 128+, Safari 17.5+), notes inside the Leaflet map library (listed apart), the SameSite cookie setting (the program sets it itself), or the browser-test note.
  • Browser errors now show the message, the file and line, and whether they happened in this version.

Threat intelligence that concerns this server

  • CISA KEV entries match the vendor and product exactly (no more PHPMailer, WordPress plugins or Windows programs that bundle OpenSSL). NVD is asked by product (CPE), not by a word in the text.
  • Each CVE is checked against what is installed: on Ubuntu with Ubuntu's security tracker (it knows the fixes Ubuntu backports; the running kernel for kernel CVEs); elsewhere with NVD's affected versions. Those that do not apply are marked Not affected with the reason; those that do say what to install. Old word matches are removed.

Search engines (Google)

  • New Admin › Website › Search engines: title, description, sharing picture, Google Search Console and Bing codes, which pages to show, and a check of every public page.
  • Public pages carry canonical addresses, Open Graph and X cards and structured data; robots.txt and sitemap.xml are made by the program; every private page says noindex. Static files are cached longer and compressed.

Version 4.8.25 (November 2026). Prepared by Franko.

Pricing page: company plans from the pricing document, with a slider calculator

  • The pricing page now follows the pricing strategy document: Starter $49, Professional $99, Business $199 (recommended), Enterprise from $399 and Enterprise Plus (custom quote), each a monthly company price with included users, vehicles, powered equipment and storage.
  • Cost calculator with ruler sliders for full-access users, driver users, vehicles, powered equipment, non-powered equipment and storage. Each ruler marks where every plan's allowance ends; drag or type a number. Optional modules are tick boxes. Every plan is priced live, the lowest-cost one is marked, and the chosen plan shows a line-by-line estimate. Monthly or annual (10% off recurring charges). Above the Enterprise allowances it suggests an Enterprise Plus quote. On phones a bar at the bottom keeps the total in view.
  • Extra usage ($5 full-access user, $1 driver user, $3 vehicle, $1.50 powered asset, $0.50 non-powered asset, $10 per 50 GB or $35 per 250 GB, whichever is cheaper), 14 optional modules, infrastructure upgrades, setup and migration services, what every plan includes, what is quoted separately, billing options and the 14-day trial are on the page.
  • Admin › Pricing page edits every number: the pricing model, each plan's included amounts and starting-price mark, extra-usage rates, modules (and the plan they are included from), upgrades, services, billing options and trial days. Use the pricing document fills the form with the document; Bring back earlier prices fills it with what you had before. The page switched to the document once on update, staying on or off as it was.

Version 4.8.24 (November 2026). Prepared by Franko.

Fleetio work orders: everything, as in Fleetio

  • Fleetio sends each work order's lines inside the work order. They are now copied from there on every pass: every service task with its labor and parts cost, every part (Fleetio's part number and description, linked to the part here, quantity, unit cost, total) and every technician with their hours, rate and cost. Before, only the first technician of a task was kept and the others' hours were lost.
  • Technicians on this job is filled from Fleetio (the lead technician marked Lead). Their labor is already in the task lines, so it is not counted twice.
  • Also copied now: issued by, the lead technician, scheduled and expected completion dates, odometer in and out, PO number, both taxes, discount, downtime, complaint, cause and correction, VMRS codes, and Fleetio's comments.
  • Lines are rewritten only when they changed in Fleetio. Every work order already copied is read once more in full (a few each pass; all at once with Sync work orders).

Version 4.8.23 (November 2026). Prepared by Franko.

Server Administration Command Center

  • A new Admin › Command Center for server administrators: an overview of every area (tiles you can order and hide) and twenty pages: themes and branding, history and timeline, time tracking, diagnostics, browser compatibility, security operations, threat intelligence, database, storage, backup and recovery objectives, updates, infrastructure, features and configuration, notifications, knowledge base, AI assistant, platform usage, billing and revenue. See the manual article "Server Administration Command Center".
  • Themes: separate themes for the Command Center, landing page, sign-in pages, demo, new company accounts and personal accounts. The theme buttons on Account › Appearance (Light, Dark, Armor HUD) are now configurable: labels, themes, icons, colours, shapes, sizes, spacing, hover, placement, collections per plan or company, recommended, versions, rollback, export and import. Landing page designs can be saved, previewed (desktop, tablet, phone), scheduled and restored. Choose what companies may change; give everyone the default theme only when you ask (with Undo).
  • History and time: every release since the installation and every change, with a unique ID; time tracking with start, pause, resume, stop, entries by hand, corrections with reasons kept; analytics; exports to PDF, Word, Excel and CSV with a cover page, contents and summary.
  • Maintenance: diagnostics with causes, fixes, risks and verified automatic fixes; browser compatibility (actual problems apart from risks, errors per browser); database sizes, integrity, missing indexes and growth; storage per category and company, orphaned files to quarantine, retention; RPO and RTO checked against the real backups; update list and component versions; caches and scheduled tasks.
  • Security: a vulnerability scan (PHP, sessions, two-step sign-in, permissions, headers, TLS, exposed files, page libraries against OSV, operating system updates); CISA KEV and NVD threats with status; SQL injection and XSS attempts in addresses are counted and blocked like probes; lock a sign-in and end its sessions; escalation of unacknowledged issues; security report export.
  • Business: invoices, payments, credits, refunds, add-ons and promotions; Stripe (optional) with signed webhooks (hook.php?source=stripe); duplicate and retire plans; revenue analytics (MRR, ARR, trials, conversion, cancellations, failed payments, retention, by tier and company).
  • Feature flags (test accounts, chosen companies or plans, everyone) and configuration snapshots with compare and rollback (never keys or passwords). An optional AI assistant (Anthropic or OpenAI key) explains and recommends; it never acts by itself.

Fixes

  • Glass effects get the -webkit- prefix Safari needs (28 places). A deprecated PHP fallback was replaced.

Version 4.8.22 (November 2026). Prepared by Franko.

Resolving Samsara defects from Fleet OverWatch works

  • Defects and reports copied from Samsara are kept here as "sam:<Samsara id>". That whole name was sent to Samsara, which answered "id is not valid", so no fix reached Samsara. Now Samsara's own id is sent. Fixes that stopped with "id is not valid" are sent again by the background worker by themselves.
  • Resolve (report viewer, Inspections and the Shop dashboard), pressed by someone not yet linked to a Samsara user, opens Who are you in Samsara?: the Samsara users whose name is like theirs (full name, sign-in name or email name; best first, each with its Samsara ID and why it matches). Pick yours, or search by name. It is remembered for your next fixes; the fix then goes on. "Resolve without choosing" uses the default mechanic when one is set.
  • When Samsara refuses the Samsara user who signed (for example "id is not valid"), the person is asked again, told which Samsara user and ID was refused; that user is no longer picked automatically and is marked in the suggestions. The mechanic window shows Samsara IDs too.

Fleetio work orders: no more duplicates, every part

  • The sync looks again before it makes a work order: one made here earlier without its Fleetio id (an older import of Fleetio's export, for example), on the same truck with the same number or issued in the same minute, is linked to Fleetio and filled in, not copied. When two records carry the same Fleetio id, the one not archived (then the oldest) is used.
  • Every work order copied before 4.8.22 is read from Fleetio once more (a few each pass; all of them on Sync work orders), so the parts and labor not under a service task, with their prices, are on it. Its Fleetio lines are replaced, never doubled. A part on a line is found by its number, then by its name.
  • Fleetio ids that a spreadsheet wrote as "12,345,678" or "12345678.0" are read as Fleetio's id.

Fix: "Call to undefined function shell_exec()"

  • On servers whose PHP turns off shell_exec, exec, proc_open and popen, the Fleetio sync (service reminders and service entries) stopped with "Call to undefined function shell_exec()". Every such call now checks first and goes on without it (the sync counts the processors from /proc instead, or assumes one).

Find duplicates and Clean duplicates

  • Find duplicates on the Work orders and Inventory lists (and on the Fleetio card): the groups of records that are the same work order or item, with why (same Fleetio id; same number on the same truck; same truck, issue minute and total; same item number; or, to check, the same name), which one is kept, and every record's lines, parts, Fleetio id and source. Two different Fleetio records are never put together.
  • Merge keeps the chosen one (the one with Fleetio's lines by default), fills its empty fields from the others (the tasks from an export, for example), moves comments, files and everything that points at the others (stock, work orders that used an item, purchase order lines) to it, and archives the others with "Duplicate of …". Lines move only when the kept one has none of that kind; an export's task list is never added on top of Fleetio's lines. Recent merges has Undo.
  • On the Fleetio card: Clean duplicates (merges every sure group of work orders and inventory) and Clean duplicates after each sync (administrators). Merging is for administrators and managers; the shop can look.

Default live map icon for every company account (server administrators)

  • Themes › Looks › Live map icons › Server default (also Admin › System settings › Display and sounds › Set the default live map icon): icon style, size, truck picture and colour, trailer picture and colour, for every company account on the server.
  • A truck's or trailer's own picture still wins, then the server default picture, then automatic (by class or trailer type). For style and size, each person's own choice and the company's default still win, unless Use over company defaults is ticked. Back to built in removes it.

Version 4.8.21 (November 2026). Prepared by Franko.

Fleetio work orders come over with their parts, labor and prices

  • Fleetio work orders whose parts and labor are not linked to a service task (Part and labor lines on their own, as on most shop work orders) came over without them, so the work order had no parts and no prices. Each such line is now copied: parts with quantity, unit cost and part number (matched to your parts list by number or name), labor with the technician, hours, rate and cost. Totals match Fleetio.
  • Work orders already copied are filled in by the sync over the next passes, without loading the server.

Importing Fleetio's work order export (CSV)

  • Import, export › Fleetio work orders reads Fleetio's work order export as it comes, including the short export (Fleetio ID, vehicle, status, service tasks, issue date, operator, labels, total cost, issued by). Operator and Issued by names are kept.
  • No duplicates: a row is matched by its Fleetio ID first; a row with no Fleetio ID is matched by the same truck and the same issue minute. Matched work orders are updated, not added again, and lines Fleetio's sync already copied are not doubled by the file's task list.
  • The export does not carry parts, labor or prices. When Fleetio is connected, every imported work order is then read from Fleetio in full (lines, parts, labor, prices, dates, odometer), in the background. The result says so.

Server control: readings when PHP may not read the system

  • Some servers' PHP-FPM sets open_basedir and turns off shell_exec, proc_open and popen, so the web server cannot read /proc or /etc. The readings are now also taken by the cron job every minute (not only by one worker part), so the windows fill in even when a worker part is stopped.
  • The window says whether the reading is missing, old or partial, and gives the optional PHP-FPM change that lets the web server read the system itself.

Version 4.8.20 (November 2026). Prepared by Franko.

Time off: departments, managers' emails, approvers and a new calendar

  • The request has a Department: Dispatch, Shop, Class A, Class B, Class D, Manager, Finance, HR or Safety (company admins can change the list). Drivers pick their class; it shows as A, B or D on the calendar. It starts on the person's usual department.
  • Departments and approvers (company admins, on the Time off page): for each department, the managers' email addresses that are emailed about every request (several, separated by commas), and which managers may approve or deny that department's requests. With none ticked any manager may, as before; company admins always can.
  • Managers approve or deny from Requests to approve, from a day on the calendar, or from the request itself. Requests for other departments show as "waiting for another manager".
  • The calendar shows everyone who is off, with their driver class, and on each day how many are off and pending. Approved, Pending and Denied (managers) switch on and off; filter by department or person; Month, List and People views. The side list shows how many days each person is off that month (pending apart). Select a day or a name for the detail.

Check engine decoder in the menus

  • 4.8.18's decoder had no menu entry. It is now under Diagnostics in Maintenance, Shop and OverWatch, and in My view for Maintenance and Shop.

Fleetio: records not in Fleetio's lists are checked one by one

  • Fleetio leaves some records out of its lists (for example work orders on archived trucks). 4.8.19 warned that 3,076 work orders were no longer listed. Now each one is asked for on its own: only those Fleetio says were deleted are archived here; the rest are kept. 150 are asked per pass, so the server is not loaded; the card shows how many are kept, archived and still to check.
  • Anything 4.8.19 archived only because Fleetio did not list it is restored once.

Fixes

  • Clear on Sync status now removes the errors and they stay cleared: the same error on the next run is counted but not shown again for a day (a different error shows at once). Samsara defect and inspection write-back messages clear too.
  • Health check screens: fail no longer keeps popping up: the live screen data may take up to 3 minutes per round on a busy server, an issue opens only when a problem has lasted 5 minutes, and closes after two passes. The detail names the slowest step.
  • Server control readings (CPU and processes, memory, disks, network, system, services) are now read by the background worker as well, every minute. When the web server may not read the system itself (PHP-FPM restrictions), the window uses those and says why. The Database window lists tables and sizes on MySQL and MariaDB too; Sessions shows "last seen" as a time.

Version 4.8.19 (November 2026). Prepared by Franko.

Keeping Fleet OverWatch a full copy of Fleetio until you switch the sync off

  • With the Fleetio sync set to Copy, then keep in sync (Import, export › Copy from other platforms), every pass brings over what changed in Fleetio, and once a day a full pass reads every record.
  • Deleted in Fleetio: after a pass that read a whole list without errors, records Fleetio no longer lists (work orders, issues, parts, vehicles, contacts, vendors, purchase orders, fuel and service entries, inspections, service tasks, equipment) are archived here, never deleted. If Fleetio lists one again it comes back. A truck still reporting through Samsara is never archived this way (it would leave the live map).
  • Safety: if more than a fifth of a list (over 25 records) disappears at once, nothing is archived; the Fleetio card reports it so you can check.
  • Checked by itself: after each full pass every list is counted against Fleetio. When records are missing or details are not read, it runs Sync work orders or Sync inventory by itself (at most every 6 hours). The Fleetio card shows In sync with Fleetio with the time of the last check, or what is missing.
  • Easy on the server: the sync runs at low priority, and when the server is busy (load above the number of processor cores) it pauses until it is not, so people using the program always come first. It already waited 1.3 seconds between Fleetio requests and only saves records that changed.
  • When the company is finished with Fleetio, set the sync to Off: nothing is removed; everything copied stays here.

Fleetio work orders on archived, sold or new trucks

  • A work order (or issue, service entry, fuel entry, meter reading or inspection) on a truck that is not in Fleetio's vehicle list was skipped without a word. Fleetio leaves archived and sold trucks out of that list, so their whole work order history never came over.
  • Now that truck is read from Fleetio on its own and copied (archived here when it is archived there), and the work order comes with it. Only when Fleetio no longer has the truck at all is the work order skipped, and the card counts it ("work orders skipped: their vehicle is not in Fleetio").
  • Sync work orders reads the trucks, contacts and vendors first, so work orders on trucks added to Fleetio since the last sync come over too.
  • If Sync work orders or Sync inventory is not picked up by the background worker within two minutes, the Fleetio card says so and how to restart it.

Version 4.8.18 (November 2026). Prepared by Franko.

Fleetio sync: finishes what it starts

  • A pass read the line items of at most 300 work orders and the quantities and prices of at most 120 parts, and still said Done. Sync now now reads every record and every detail with no limit; the hourly quick passes keep their limits but carry on where they stopped.
  • When anything is still not read, the Fleetio card says so ("50 work orders without line items read from Fleetio yet") instead of just Done, and the sync run note says "Not finished yet".
  • New on the Fleetio card (Admin › Integrations › Sync status): Sync work orders (every work order and all of their line items) and Sync inventory (every part, stock at each location, purchase orders, and every part's quantity and price). Both run in the background.
  • What the sync copies: switch Work orders or Inventory off so the regular sync leaves them alone.
  • Compare with Fleetio: how many records Fleetio has in each list against how many are here, with what is missing.

Check engine light decoding based on the vehicle

  • Diagnostics › Check engine decoder (also in the Shop menu): pick a truck (or type a VIN), type one or more codes (P0420, SPN 3226 FMI 4, 3251/0) and each is decoded for that truck.
  • What you get: what the code is made of (system, part, failure mode, cylinder, bank, the module that sent it), what it means, how urgent, the first things to check, and the diagnostic software for that engine or make (Cummins INSITE, Detroit DiagnosticLink, PACCAR DAVIE, Volvo/Mack Premium Tech Tool, International ServiceMaxx, Ford FDRS, GM Techline, and others).
  • It checks the code fits the truck: a cylinder 8 misfire on a six-cylinder engine, a spark plug or oxygen sensor code on a diesel, a particulate filter code on a gas truck, a maker-specific code (whose meaning comes from that maker).
  • The truck comes from its record (make, model, year, engine, engine make and model, fuel type); empty make and year are read from the VIN.
  • The company's own Diagnostic code library comes first: a definition for the truck's make wins.
  • Fault codes has a Decode button on every active fault, and live faults are explained for their own truck.

Version 4.8.17 (November 2026).

Pricing page rebuilt

  • The public page pricing.php now has the front page's look, menu and footer: plan cards with a Most popular plan, a Monthly / Yearly switch, a cost calculator (number of trucks × price, with the monthly minimum), a comparison table, questions and answers, and a closing call to action. It works on phones.
  • Admin › Website › Pricing page (server administrators): Use suggested prices fills in three suggested plans (Starter $9, Fleet $16 per truck a month, Enterprise "Let's talk"), a 15% yearly discount, a $49 monthly minimum, the comparison table and six questions. Nothing is saved until you press Save, and every price, line and question can be changed.
  • New settings: a line under each plan name, Most popular, yearly discount, monthly minimum, calculator on or off, the comparison table (one row per line) and the questions.
  • While the page is on, the front page menu and footer have a Pricing link. The page gives search engines the prices and questions (structured data) and its canonical address.

Version 4.8.16 (November 2026).

Driver qualification files: hide and delete drivers

  • Hide on a driver's row takes them off the list and out of the totals, for example after they quit. Their documents and files are kept. Tick "They quit or were let go" to also set their leave date, which takes them off the random testing pool.
  • Show hidden drivers (next to the search box) lists hidden drivers and drivers whose leave date has passed, dimmed and marked Hidden or Left; Unhide brings one back (and clears a leave date that has passed).
  • Delete (company admins and managers): Remove takes the person off every list and keeps their DQ documents, as FMCSA retention requires; Delete permanently (company admins, the driver's name typed to confirm) erases the person, their DQ documents and files. It is refused while work orders, vehicles, fuel or other records point at the driver, and for drivers that come from Fleetio.

Version 4.8.15 (November 2026).

Driver file documents: upload a PDF or other file

  • The DQ document form (Driver qualification files › + Doc, a square in the grid, or Add DQ document on a contact) has a Document file box: Upload PDF or document… or drop files on it. PDF, pictures (JPG, PNG), Word, Excel, CSV and text. The files upload when you press Add or Save.
  • An existing DQ document has Upload document at the top and an Open button for each file; all files are on its Files tab. The driver file grid shows a paperclip where a file is attached, and the printed file lists them.
  • Drivers cannot upload to driver files. Program files and other types are refused.

Mechanic name for Samsara fixes (window)

  • Inspections › Samsara settings, or Enter mechanic name next to a "needs a mechanic" message, opens a window: search the Samsara users (it starts with your own name), then choose Remember for me, Default mechanic (signs fixes closed through work orders and for anyone without a match) or Both.
  • Match names automatically: a person whose name matches exactly one Samsara user signs as that user.
  • Saving a default sends the waiting fixes again at once. Company admins and managers get the window by themselves once when fixes are waiting and no default is set.

Sync error report

  • Fleetio lists the API key is not allowed to read (for example equipment, 403) are now a note, not an error repeated every sync.
  • Short network or DNS outages are one "could not reach Fleetio" problem that closes by itself when Fleetio answers; a list that reads again closes its own error. Old ones of these are closed once on update.

Version 4.8.14 (November 2026).

Technician rates (company admins)

  • Admin › Company › Technician rates: every technician on one page with an hourly rate box, whether or not they have a sign-in, and the rate work orders will use and why. For someone with a sign-in it is their Hourly pay (Admin › Users); for someone without one it is kept privately for admins.
  • Hourly rates are the company admin's: only a company admin can set a technician's rate, the labor rate on a contact, or a rate for one job on a work order. Others still add technicians and hours.
  • Order used on a work order: a rate typed for that job → the technician's rate → the labor rate on their contact → the company labor rate (Settings).

Version 4.8.13 (November 2026).

Technicians on this job, in the work order form

  • The work order form (new and edit) has Technicians on this job under the Lead technician: + Add technician as many times as needed, and for each one the technician, role, hours and hourly rate. Leave the rate empty to use their pay rate (set by a company admin), their labor rate, or the company rate. Saved with the work order; the labor total adds them all up.
  • Each technician line on the Tasks and parts tab shows hours × rate, and has its own Hourly rate when edited.

Version 4.8.12 (November 2026).

Server ran out of memory at night (fixed)

  • A background part of a company with a very large copied history (25 GB) sorted that table in memory: 3.3 GB on a 4 GB server, which froze it. Background parts now sort large tables on disk, and SQLite's own memory has a ceiling (512 MB for a background part, 256 MB for a web request; PHP's memory limit does not cover it). A query that would need more stops with "out of memory" for that one step; the server keeps running.
  • The nightly clean-up does the same, and when it stops it now reports the real reason instead of "cannot rollback - no transaction is active".

Version 4.8.11 (November 2026).

Lead technician and more technicians

  • A work order's Technicians list has a Lead technician choice (any technician, on the job yet or not) and make lead beside each technician. There is one lead per work order, and the work order's Lead technician always matches. + Add another technician adds more.

Manual editor (server administrators)

  • Admin › Website › Manual editor: change any article of the user manual (title, section, who may read it, summary, text) with a toolbar and a preview, add your own articles, take articles out and put them back, go back to the program's version, upload pictures, and change the manual home page's title and introduction. Changes are kept in the data folder, so updates never overwrite them; an edited article whose program version changed since is marked Program changed.

Fixes

  • "disk I/O error" on the company accounts register (demo.php): database files opened by a root command are given back to the website user, the register is opened again once after such an error, and worker.php doctor checks every company's database files.
  • A TypeError in the interface sounds (uisound.js) on events that come from the page itself rather than an element.

Version 4.8.10 (November 2026).

Technicians, positions and pay

  • Several technicians on one work order. The Tasks and parts tab has a Technicians list: add everyone who worked on the job, their role (lead, technician, helper, trainee), date and hours. Each one's labor cost is their hours times their pay rate, and the work order's labor total adds them all up. The work order list has a Technicians column. Existing work orders keep their lead technician as the first on the list.
  • A position for each user (Driver, Dispatch, Technician, Shop, Manager, Safety, Office, Owner, Other). Company admins change the choices in Maintenance › Lists and choices › User positions. Users with a Technician or Shop position get a technician record by themselves, so they appear in the work order technician lists.
  • Hourly pay for each user, set in Admin › Users. Only company admins see or change it; it is not shown to the person or other users and the amount is not written to any log. Work order labor uses it first, then the contact's labor rate, then the company labor rate.

Version 4.8.9 (November 2026).

The live map no longer waits for cron

  • After a planned restart (an update, a settings change) or the regular refresh every few hours, the hub and the Samsara reader start again by themselves at once. Before, they waited for cron's next run, and when cron stalled the live map stopped until it ran again ("Health check screens: fail", "cron has been stopped").

Version 4.8.8 (November 2026).

Every asset live on the map

  • Trailers follow their truck in real time: a hooked trailer is drawn just behind its truck every frame, wherever the truck is drawn (Samsara-tracked trailers and trailers in the fleet list).
  • Trailer and equipment positions go straight from the Samsara reader to the map, like truck positions.
  • Smoother movement: trucks and trailers glide in quarter-pixel steps instead of whole-pixel jumps.
  • During a long background round, the live screens still get fresh positions every 15 seconds.
  • Health check "screens" is a warning, not a failure, while positions are live and only the other details are behind; it names data/hub_steps.json.

Version 4.8.7 (November 2026).

Health check fixes

  • Sample company accounts and the demo: Sync status, Comments, the Change log, dashboard layouts and Search now work (they showed errors or nothing, because their requests were never sent to the server).

Version 4.8.6 (November 2026).

Live map: positions straight from Samsara

  • The Samsara reader now hands each new position straight to the live map. Trucks keep moving even when the background hub is busy with a long round (or stopped); before, every position waited for the hub, and a slow round froze the map for minutes.
  • While the other details lag, the map says so: "Truck positions are live. Other details … were last updated N minutes ago."

Version 4.8.5 (November 2026).

Live map fixes

  • Trucks move in real time again: each truck now carries the time of its GPS fix, so the map moves it on between fixes (in 4.8.4 the fix time was dropped on the way to the map, so trucks only jumped at each new fix).
  • The map uses the server's clock of the moment, so trucks are no longer held a few seconds behind.
  • Live data keeps flowing while a database is compacted or busy: the hub and the Samsara reader keep running and publish positions; the other parts wait. Before, a compaction stopped the live map for its whole length (an hour or more on a large database).
  • Company accounts no longer start and stop their parts every minute while their database is compacted.

Version 4.8.4 (November 2026).

Live map

  • Real time: moving trucks are drawn where they are now (last GPS fix moved on along heading at speed), easing into each new fix without jumps. Samsara positions are read every 5 seconds.
  • The map only downloads the fleet when something changed (about 70% less data), and large answers are compressed. On slower computers the map does about a quarter of the work it did.
  • A map tab in the background asks less often and refreshes when you return.

Pause syncs

  • Sync status has Pause on each service (and Copy from other platforms) and Pause all. Start now or at a set time; turn back on when you press Resume, after a while, or at a set time.

Fixes

  • A large GPS history copy no longer locks a company's database (its live map and other background parts kept stopping).
  • Slow live-screen steps are written to the log by name.

Version 4.8.3 (November 2026).

Automatic clean-up and compaction

  • Copied GPS and engine history (Copy from other platforms, the "a lot of data" lists) older than 90 days is removed automatically. Old handled errors, sync runs, failed jobs and read notifications are removed too. Your records and the change log are kept.
  • Each database is compacted around 3 AM when there is space to reclaim and enough free disk, so the space comes back.
  • Admin › Usage and limits shows each company's database size and reclaimable space, with a Reclaim space button.
  • The open demo no longer sometimes starts empty (a visitor's first page load could make their copy twice at once).

Version 4.8.2 (November 2026).

Background worker parts stay up

  • The supervisor starts the parts before its housekeeping, so a slow or failing housekeeping step can no longer keep every part down ("Worker parts 0/6").
  • Planned stops (the 6-hour refresh, restarts after updates or settings) no longer count as failures, so automatic recovery no longer puts parts on hold for them.
  • The Command center and Admin › Program › Worker parts say when and why each part last stopped. php worker.php doctor shows the same, plus whether cron is running.

Clear sync errors

  • Sync status has a Clear errors button, and a Clear beside each red card message. Anything still wrong shows again on the next sync.

Your name in Samsara

  • When a DVIR fix needs a Samsara user, you are asked for your name as it appears in Samsara and pick it from Samsara's list. It is remembered for your next fixes, and waiting fixes are sent right away. It is forgotten and asked again only if Samsara rejects it.

Version 4.8.1 (November 2026).

Fleetio sync fixes

  • A list the Fleetio API key may not read (such as equipment, HTTP 403) is skipped and named in Sync status, not counted as an error.
  • Renewal reminders with no due date in Fleetio are left out and counted instead of each being refused ("Please fill in: Due"). They come over once they have a due date.

Version 4.8.0 (November 2026).

A cleaner, more polished look

  • The site's fonts now come from your own server, so headings and text look the same everywhere, even where Google Fonts is blocked.
  • After an update, a one-line note ("Updated to 4.8.0 · What's new") replaces the long list.
  • A quieter menu: group counts appear when you point at a group, and important pages have a small dot.
  • Admin pages match the rest of the site; the HUD look is a choice in Server control.
  • Page headers: no repeated names in the breadcrumb and one way back.
  • Command dashboard: Refresh beside Arrange, and calm notes in place of empty charts.
  • Phones: Back and the page tools on one row.
  • Every theme keeps its colors. Unused code was removed.

Version 4.7.9 (November 2026).

Alvys TMS (Admin › Integrations › Connected services › Alvys TMS)

  • Sign in with the Client ID and secret from Alvys (Admin Portal › API Access); the secret stays on the server. Test connection, Sync now, then every 15 minutes.
  • Trucks and trailers (matched by VIN or unit number), drivers (to contacts, with license and medical card dates), customers, and loads: each Alvys trip on the dispatch board with pick-up, delivery, appointments, truck, trailer, driver and its status following Alvys, plus line haul, fuel surcharge, accessorials, miles and PO in Load details.
  • If you want them: maintenance into service history, fuel into fuel entries, and truck positions from Samsara sent to Alvys. Every part and error is in Sync status.

Version 4.7.8 (November 2026).

Comments on records

  • Every work order, repair request, issue, inspection, service reminder, vehicle, part, purchase order and other record shows its comments right on its first tab, with a box to write one (Ctrl+Enter sends). The Comments tab shows them all.
  • Edit your own comments (shown as edited); delete your own, or any as an administrator. Type @ and a user name to tell that person (a notification, if they may see the record).
  • Comments (Team, in every section): the latest comments on records you may read; filter by kind of record, Mine or Mentioning me; reply in place; open the record.

Change log (Admin › Activity › Change log; Settings › Company › Change log). Company administrators only.

  • Everything people did: records added, changed (each field, from → to) and deleted; files uploaded and deleted; comments written, edited and deleted; imports; DVIR defects resolved, reopened and signed off; and every change to settings, users, roles, the company theme and the shipment log.
  • Filter by dates, person, what happened and kind of record; search any word or value; open the record; Download CSV. Sign-ins, downloads and exports are hidden unless ticked. Entries cannot be edited or removed.

Arrange any dashboard (the Arrange button on every dashboard and section page, and on the Command dashboard)

  • Drag a card by its ⠿ handle (or use ‹ ›) to change the order; the eye hides a card or shows it again. The small controls appear when you point at a card. Reset this page puts it back. Each person's own, kept for their sign-in on every device.

Search everything (the search box at the top of the menu, Ctrl+K or /, and the Command dashboard's search)

  • Pages in every section you can open, settings, themes (choose one to use it), and records you may read: vehicles, work orders, issues, repair requests, parts, inspections, DVIR reports and defects, service reminders and entries, people, vendors, purchase orders, tires, documents, loads and customers; and comments.

Clear the shipment log (Dispatch › Shipment log; administrators and managers)

  • Clear log… removes the steps shown (the dates and driver chosen) or the whole log. Shipments are not changed; loads per shift and week, and driver scores counted from loads, count only what is left. A copy is kept 30 days: Undo last clear puts it back. Recorded in the change log.

Version 4.7.7 (November 2026).

Service due: worked out here, checked against Fleetio

  • Fleet OverWatch works out each service reminder itself (dates, odometer, engine hours), then checks Fleetio. When Fleetio shows the service as done or snoozed, it is not due here either; when Fleetio shows it due or overdue, the more urgent of the two shows.
  • This now happens whenever Fleetio is connected (its API key and account token are set), in every sync mode. Before, it happened only in the "kept in sync" mode: after a one-time import, or a copy with Copy from other platforms (which switches the main sync off), every status was worked out here alone, against this server's odometer, and services done in Fleetio showed as due.
  • This program's own reminders (from its service programs) are checked too: when Fleetio has the same service for the same truck and it is done there, it is not due here. The same service is recognized under different names ("Oil change" = "Engine oil & filter replacement", "PM-A" = "A service", "DOT annual" = "Annual inspection"), and a service done in Fleetio's service history completes the matching reminder here.
  • While Fleetio is connected, its service reminders are read every 10 minutes in every sync mode (the first a minute after the worker starts), and its service history once an hour when the full sync is not running.
  • Check service status against Fleetio (Sync status): reads Fleetio now and lists every service due here and not in Fleetio, due in Fleetio and not here, and due here only (with why), with Copy.

Sync status and sync errors (Admin › Integrations › Sync status; Settings › Integrations › Sync status and errors; administrators and managers)

  • Every connected service and each part of it: Samsara (positions and engine data, each list it reads, odometers, defects to issues, defects resolved in Samsara with waiting / refused / sent counts), Fleetio (full sync, service reminders), Sylectus, Omnitracs, Comdata, webhooks, inspection photos. Each shows whether it works, when it last worked, and the error in full.
  • A running Fleetio sync shows a progress bar: list n of m, records read and how many Fleetio says are left. While it runs, a small bar shows the percent on every page (bottom right); click it to open Sync status.
  • Every sync error is logged: once per error, counted when it happens again, with first and last time; it clears by itself when that part works again. The list includes Fleetio records that could not be saved and defects Samsara refused to resolve.
  • Copy puts one error on the clipboard; Copy full report puts a troubleshooting report (version, each integration, every open error in full, the last runs) on the clipboard; Download .txt saves it. Keys, tokens and passwords are never in it.
  • Sync now starts a full Fleetio sync; Mark all handled clears the list.

DVIR defects resolved here, resolved in Samsara (since 4.7.4): failures now show on Sync status with Samsara's reason (most often: the API token needs Write Defects, or no Samsara user is chosen to sign; Inspections › Samsara).

Version 4.7.6 (November 2026).

Server administrators: Settings at the top of the Admin menu

  • The Admin menu now has a Settings group right after Overview: All settings, Landing page, Themes in use and Site email. (Since 4.6 every setting is reached from one Settings entry; the 4.7.4 menu layout had left that entry, without a heading, at the bottom of the menu.) On a hosting-only server too.
  • The Settings page lists the server administrator's groups first: Website (landing page, pricing page, announcements and maintenance, company sign-ups and invitation codes, moderation rules, contact form messages), Accounts (company accounts, users in all companies, usage and limits, plans and switches, demo roles), Themes (themes in use, this server's theme, my display settings) and Server (site email, Automation and AI, updates, backups, access control, security, server status, configuration file). The company groups (Company, Operations, Integrations, Notifications) follow. The search box finds any of them.

Themes in use (Admin › Settings › Themes in use; server administrators only)

  • Every company account's theme and every user's theme, on this server and in each company account: the theme they see now (their own, or the company theme), the day/night and device themes from their Display settings, and their accessibility choices. A count of the themes most in use; search by company, user or theme; one account at a time.
  • View shows the whole page in that account's or user's theme, exactly as they see it (colour changes included), including any of their day, night or device themes. Nothing changes for them; Back to my theme returns.
  • Change… sets an account's company theme, or a user's own theme (with a search and a View before saving). Locked makes everyone in an account see the company theme. Company theme puts a user back on the company theme, and can switch off their day/night and device themes.
  • Every change is written to the platform audit.

Version 4.7.5 (November 2026).

Display settings (the Display button at the foot of the menu, Display settings in View › Themes, or the Display card in Settings). Each person's own; saved to their sign-in and used on every computer, tablet and phone they sign in on.

  • My look: pick the theme to start from, then change its heading and body fonts, layout, panel frame, animated background, motion speed, icon weight and corner style. Colours are still set in the colour editor (View › Themes › Colours).
  • Day and night: switch automatically between a day theme and a night theme, at set times or when the device turns dark mode on and off.
  • Animated backgrounds: choose any of the moving backgrounds (grids, particles, waveforms, ambient light and the theme scenes), its strength, or none.
  • Devices: a theme, background strength and text size for the computer, tablet and phone; Adapt to the device gives larger touch targets and calmer layouts on tablets and phones.
  • Accessibility: more or maximum contrast, text size (80% to 160%), reduced motion (or follow the device), colour-blind-friendly status colours (red-green, blue-yellow, or monochrome), underlined links, a larger focus outline and an easy-to-read font. Applied from the first paint, before the page draws.
  • Sounds: a sound pack for interactions (or the theme's own), notifications and alerts, each can be off, and a volume.
  • Export and Import a settings file; Reset all puts everything back. When an administrator locks the company theme, the company theme wins; accessibility still applies.

50 more themes (205 in all) in five new groups in View › Themes › Full looks: Industrial and engineering (Ironworks, Blueprint, Machinist, Hazard Zone, Flight Deck, Carbon Velocity, Field Operations, Circuit Forge, Laboratory, Power Grid), Nature and landscapes (Evergreen, Abyssal, Desert Bloom, Arctic Frost, Magma Core, Autumn Ember, Bioluminescence, Tropical Escape, Alpine Summit, Aurora), Architecture and interiors (Zen Minimal, Golden Deco, Concrete Brutalist, Midcentury Modern, Marble Estate, Nordic Living, Emerald Lounge, Crystal Architecture, Midnight Yacht, Heritage Library), Art and abstract (Geometric Studio, Watercolor, Liquid Spectrum, Monochrome Grid, Pastel Dream, Ink & Motion, Prism Shift, Fractal Dimension, Pop Art Studio, Topographic) and Fantasy and science (Gothic Dominion, Enchanted Realm, Celestial Observatory, Quantum Field, Analog Signal, Orbital Station, Deep Cosmos, Synthetic Intelligence, Exoskeleton, Dimensional Rift). Each has its own colours, layout, motion, animated background, fonts, frame and sounds. 42 new animated backgrounds and eight new frames (riveted steel, carbon fibre, marble, ink, ornate, wood, crystal glass, instrument bezel). The new Blueprint (navy schematic) is a separate theme from the existing Blueprint (engineering drawing) in Animated scenes.

Version 4.7.4 (November 2026).

DVIR defects resolved here are resolved in Samsara

  • Resolve on a Samsara defect (on the Inspections page or in a report) now resolves it in Samsara too, with what was done as the mechanic notes. The defect then shows "✓ Resolved in Samsara".
  • Also sent: defects fixed by completing their work order (or resolving their issue), and the mechanic sign-off of a report marked unsafe.
  • If Samsara cannot be reached, the fix waits and is sent again automatically; if Samsara refuses (for example the API token lacks the Write Defects scope), the defect says why, with Retry.
  • Samsara needs a Samsara dashboard user as the mechanic: people whose email matches a Samsara user sign as themselves; everyone else signs as the user chosen under Inspections › Samsara (administrators and managers). Sending can be switched off there.
  • Samsara does not allow reopening a resolved defect: reopening one here reopens it here only. Nothing is ever sent from the sample company.

Sections and menus organized

  • The dashboard lists the sections in working order: Overwatch, Dispatch, Drivers, Safety, Maintenance, Shop, Finance, Admin, each with a line saying what it is for (Maintenance: running the fleet's upkeep; Shop: the shop floor today).
  • Every section's menu (Advanced view) is laid out in clear groups, the overview first: for example Maintenance has Overview, Work, Inspections, Service and PM, Diagnostics, Vehicles, Tires, Inventory, Purchasing, Fuel and costs, DOT, Shop floor, Contacts, Data. Pages that had drifted into the wrong group (Grade curve under Setup, Driver scores under Maintenance, Fuel under Data, Erase records under Spending) are where they belong; Driver scores and the Achievement board are under Team in sections without drivers.
  • Pages with the same name got distinct names: Maintenance reports / Fleet reports, Fuel entries / Fuel cost, Trucks (live) / Vehicles, Parts by location.
  • The Basic view ("My view") and each company's own menu changes (Admin › Menus) are unchanged and still apply.

Version 4.7.3 (November 2026).

Five plain themes in a new Plain group: Plain slate (dark gray), Plain navy (dark blue), Plain white (light), Plain gray (light gray) and Plain warm (soft beige, light). Colours only: no moving background, standard fonts, frames and sounds.

50 more themes (155 in all), in five new groups in View › Themes › Full looks. Each has its own colours, layout, motion, animated background, fonts, frame and sounds, like the earlier themed looks. Style names only: no film, show, band, game, product or character names, logos or artwork. Six new frames (glossy windows, flat tiles, frosted glass, segment panels, raised desktop, pixel screen) and 38 new animated backgrounds. The search in Full looks now also finds words in each theme's description.

  • Retro decades: Rockabilly diner (50s chrome and checkerboard); Psychedelic (60s flower power); Disco (70s gold and mirror ball); Neon sunset grid (80s); Grunge TV (90s graffiti and neon); Y2K cyber future (liquid chrome); Glossy desktop (early-2000s blue and green); Click-wheel player (white and brushed metal, light); Flat tiles (bold squares, strong contrast); Glassmorphism (frosted glass panels).
  • Film and TV styles: Digital frontier (blue and orange light lines); Holo assistant (cyan rings and readouts); Rain city (orange haze and neon); Green code (falling characters); Imperial command (dark metal, red and blue); Starship segments (orange, purple and blue panels); Freighter terminal (green monochrome, warnings); Red targeting (machine vision); Detective city (slate and surveillance); Island park control (retro green and amber).
  • Music styles: Robot house (chrome and disco gradients); Electro minimal (red, black and white geometry); Spectrum (black with rainbow light); Late night red (vintage neon city); Industrial rock (metal panels and harsh red); Festival lasers (EDM); Heavy metal (matte black, steel and red); Glam rock (hot pink, purple and gold); Island roots (red, gold and green); Jazz club (midnight blue and gold).
  • Game styles: Neon megacity (yellow, black and magenta); Space marine HUD (military green and tactical blue); Galaxy command (blue holographic panels); Wrist computer (green CRT, retro-future); Beach city 80s (pink, turquoise and palms); Hellfire (industrial metal and blood red); Test lab (clinical white, orange and blue, light); Hacker city (surveillance blue and network maps); Space guardian (metallic gold and deep blue); Bio lab (white, black and hazard red, light).
  • Tech and pop culture: Classic desktop (beige and gray, light); Handheld green (four-tone pixels, light); 16-bit console (bold arcade colours); Vapor plaza (pink and purple, retro computer); Tokyo nights (neon signs, red, blue and purple); Command center (olive drab, radar and maps); Mission control (amber and green telemetry); Brass works (copper, leather and gauges); Executive (matte black and gold trim); Holographic interface (cyan and purple light).

Version 4.7.2 (November 2026).

Parts and inventory: quantities from Fleetio, and a cleaner screen on a computer

  • Quantities from Fleetio: the sync now reads part quantities and prices straight after the parts list instead of at the end of the whole pass, keeps its place if a pass stops partway, and keeps Fleetio's total quantity when Fleetio gives no quantity per location (at the part's only location, or at Main shop).
  • Fleetio tab on each part from Fleetio: "Read price and stock from Fleetio now" brings that part over at once and shows exactly what Fleetio sent (price, quantity per location, field names), next to what is here.
  • Parts list: opens with Part, Description, Location, Total quantity, Unit, Unit cost, Reorder point, Aisle/Row/Bin, Category, Manufacturer, Manufacturer part number and Last used. Every other Fleetio column is still under Columns.
  • Resizable columns on every parts and inventory page: drag the edge of a column heading, double-click the edge to fit the column to its contents. Widths are kept in your browser; Reset widths puts them back.
  • Tidier tables: one line per row (long text ends in … and shows whole when pointed at), headings stay in view while you scroll, numbers line up on the right.
  • Search: one wide search box first on the bar, saying what it searches (part number, description, manufacturer number, UPC, location or bin), with a ✕ to clear it (or Esc).

Version 4.7.1 (November 2026).

Fixed: part quantities and prices from Fleetio

  • The Fleetio sync now brings over each part's unit cost and its quantity on hand at every location (with reorder point, aisle, row, bin and Track Inventory). Fleetio's current API sends the price in cents in its parts list and keeps quantities only on each part, and there is no separate stock list in that version, so neither came over before.
  • Every part is read on the daily full pass; the passes in between read the 120 parts checked longest ago, so stock used or received in Fleetio follows within the hour on most accounts. Admin › Integration health shows "parts with quantity and price read from Fleetio".

Version 4.7.0 (November 2026).

Platform: backups, monitoring, security, staging

  • Off-site copies: Admin › Updates and backups › Off-site copy sends an encrypted copy of every company database, the uploaded files and the settings each night to separate storage (DreamObjects, Amazon S3, Backblaze B2, Wasabi), kept 30 days. The page shows the last copy and the last practice restore; tools/restore-test.sh does the monthly practice restore.
  • Monitoring: health.php answers an outside uptime check (UptimeRobot, Better Stack). Errors in the browser now appear in Admin › Errors next to the server's, without names or email addresses, and can go to Sentry. Logs are rotated weekly.
  • Security: server administrators always use two-step sign-in. Sign-in attempts and API calls are rate-limited per address. Every page sends a Content-Security-Policy. The settings file is readable by the web server only. Admin › Security shows all of this.
  • Staging: install.sh --staging makes a staging server with a STAGING band, no connection keys, no email and sample data. docs/RELEASE-CHECKLIST.md lists the weekly release steps.
  • Fixed: the QR scanner could not open the camera, because a security header blocked it.

Phone apps 1.4: push notifications

  • Alerts reach phones while the app is closed: Android through Firebase, iPhone through Apple. Tapping one opens the truck, work order or message it is about.
  • Each person chooses critical only, all or none in Settings › My settings › Phone notifications, and can send themselves a test. Signing out stops the notifications on that phone. The push keys stay on the server.

Maintenance and the field

  • Breakdown risk (Maintenance, Shop, Command): trucks showing a fault code that came before past breakdowns of the same system, or a repair that did not hold. Each flag shows its evidence. One click opens a work order; dismissing a flag needs a reason. The page counts how many flags led to a repair.
  • Inspections without signal: an inspection and its photos are kept on the phone and sent when the connection returns, with "waiting to send" until then. Nothing is lost if the app closes, and sending again never makes a duplicate.
  • Assistant: it now answers spending questions such as "What did we spend on T-101 this year?". It is off by default: switch it on in Settings › Server › Automation and AI.

Growth

  • Move from Fleetio (Maintenance): connect, copy everything, then a report showing every Fleetio record that is here, and why any is not. The front page promotes it.
  • Shipment tracking: Loads › Tracking link gives a shipper a private page with the status, where the truck is and the expected arrival, without driver details. The link stops working 7 days after delivery.
  • Load matching (Dispatch): open load board postings with the nearest ready trucks; booking one checks it is ready.
  • Pricing page: Admin › Pricing page sets the public prices. Nothing is shown until you switch it on.
  • Starter checklist: a new company's administrators see company details, trucks, telematics and drivers on the Command page until each is done.
  • Self-hosted edition: documented in docs/SELF-HOSTED.md. It is not offered until its terms are decided.

Code

  • New features subscribe to events instead of wrapping each other's functions. Scripts and styles are served minified. Browser tests check the key screens on a computer and a phone. Admin › Page use by role shows which pages each role really opens.

Version 4.6.0 (November 2026). Prepared by Franko.

Fleetio service reminders no longer show as due after they were done in Fleetio

  • While the Fleetio sync is on (Mirror), Fleetio decides each reminder's status: a service completed in Fleetio is no longer shown as due or overdue here, whatever this server's odometer says. The reminder shows Status in Fleetio and when it was last checked.
  • Service reminders are re-read from Fleetio every 10 minutes, between the full syncs.
  • Your own reminders that duplicate Fleetio's (the same truck and task, written a little differently) are archived.

One Settings section

  • Every section's menu has one Settings entry. It holds every setting, grouped: My settings (everyone: account, password and devices, theme, live map icons, alert pop-ups, Basic / Advanced), Company, Operations, Integrations, Notifications (administrators; managers see Operations) and Server (server administrators).
  • A search box finds any setting by name ("email", "password", "Fleetio", "icons"…).
  • The old settings entries left the menus. Their addresses still work and show ‹ Settings to go back.
  • On a phone, Settings is one menu entry and each group opens as its own page.

Cost per mile (live)

  • Finance, Maintenance and Command: every truck ranked by its running cost per mile (fuel, parts, labor, tires and downtime over the miles from the odometer), month by month and over its life, with the trend (last 3 months against the 3 before).
  • Repair or replace: set a limit in Settings › Operations; trucks above it are flagged with the reason. A downtime cost per hour can be added.
  • Hidden from roles that may not see costs (Data access).

Dispatch readiness check

  • Picking a truck for a load (Dispatch assistant, Loads and appointments, Dispatch board) warns when it is due or overdue for service, has an open defect, is out of service or in the shop, or its driver lacks the hours for the trip. Each reason links to its record.
  • The truck pickers list ready trucks first; the others say why they are not ready.
  • Sending a truck that is not ready needs a short note. It is recorded with your name and the reasons, and written to the audit log.

QR codes on trucks and trailers

  • QR labels on the vehicle lists prints a sheet for every truck and trailer; Print QR label in a vehicle's record prints one.
  • Scanning a label with the phone camera opens the truck or trailer with quick actions: Start an inspection, Report a defect, Open work orders, Log fuel, the full record and the map.
  • The label holds only the record's code. The person still signs in and needs access; if they were signed out, the truck opens right after they sign in.

Also

  • Fixed: with the alerts in the side menu, an invisible strip could catch clicks on the left of some pages.
  • Code on GitHub: the package has a .gitignore, a GitHub Actions workflow (tests and a secret scan on every push) and docs/GITHUB-SETUP.md.

Version 4.5.13 (November 2026). Prepared by Franko.

Admin alerts by email: you can see why one did not arrive

  • Admin › Admin alerts now shows, at the top: whether the site email server is ready (admin alert emails go through it, not through a company's email server), the addresses the alerts go to, and how the last alert email went.
  • Send a test now says exactly what happened: emailed to how many addresses; the site email server is not set up; nobody to email (no server administrator has an email address and "Also email" is empty); email is unticked for that event; Admin alerts are switched off in Automation and AI; or the email server's own answer when it refused (for example Gmail's "Username and Password not accepted").
  • The result of the last real alert email is kept, so a failure at night shows the next morning.
  • An email server saved without a From address uses the sign-in address (for example your Gmail address).

Version 4.5.12 (November 2026). Prepared by Franko.

  • Phones: the Basic / Advanced switch moved from the top bar to the top of the menu (☰), above the list of sections, as two large buttons. The top bar keeps the menu, the page name, alerts and search.
  • The landing page's Get the Android app button links to https://github.com/fleetoverwatch (change it in Admin › Landing page).

Version 4.5.11 (November 2026). Prepared by Franko.

Share a location and get directions

  • A truck's details now have Share location and Directions under where it is. Every trailer with a position in the Trailers window has the same button (the arrow).
  • Share location sends "T-101 (driver …) is at …" with a map link. On a phone it opens the phone's share sheet (Messages, WhatsApp, email…). On a computer it copies it.
  • Directions opens Google Maps, Apple Maps or Waze; on Android also any other maps app on the phone. Copy coordinates is there for anything else.

Alerts out of the way

  • On a computer the alerts bell is now a button in the side menu, above Messages, with the number of new alerts. New-alert cards and "Saved" messages pop up at the bottom left, next to the menu. They no longer cover the Close button or the top of a truck's details.
  • On a phone the alert line shows at the bottom, above the tabs. While a truck's details, a form or a sheet is open it does not pop up at all: the bell counts it and gives a short shake. The Alerts sheet has the same Pop-ups choice as on a computer: All alerts, Critical only or None. In the phone app a new alert also gives a short vibration.

Also

  • The truck details panel is solid: the map and side panel no longer show through it, and the side panel's resize line no longer crosses it.
  • Bigger buttons on touch screens where they were small (Basic/Advanced, theme buttons, small link buttons).
  • Landing page: a Get the Android app button. Change the link, the text or hide it in Admin › Landing page › Buttons and ending.

Version 4.5.10 (November 2026). Prepared by Franko.

Email server: Gmail sign-in fixes

  • A Google app password pasted the way Google shows it ("abcd efgh ijkl mnop") now works: the spaces, and a line end copied with it, are removed. This also fixes passwords already saved that way.
  • When Gmail refuses the sign-in, the message now says which account it tried and what looks wrong: a user name that is not a full address, or a password that is not 16 letters (that is, the normal Google password, which Google refuses). Then it gives the steps to create an app password.
  • The browser no longer fills in its saved Fleet OverWatch sign-in in the email server's user name and password boxes. The boxes unlock when you tap them.

Version 4.5.9 (November 2026). Prepared by Franko.

Live map: choose your icon style and size in Themes

  • Open Themes (or select Icon style at the bottom left of the live map). Under Looks › Live map icons, choose how trucks and trailers are drawn:
    • Pictures: the truck, van, pickup or trailer, by class (as before).
    • Classic pins: the round pins with a truck sign.
    • Class badges: a round badge with the class letter (A, B, C, D, T for trailers) in the class colour.
    • Dots: small dots in the status colour, for big fleets.
    • Arrows: point the way each moving truck is heading; a stopped truck is a dot.
  • The icon size (50% to 200%, or S, M, L, XL) moved there too, from the map.
  • Your choice is saved for your sign-in and follows you to other computers and phones. Use the company default goes back to what the company uses.
  • Company administrators also select Make this everyone's default. It applies to everyone who has not chosen their own style and size. Truck and trailer pictures… (administrators and managers) still chooses the picture and colour of one truck or trailer.

Live map on phones: the details no longer cover the map

  • Tap a truck and its details open as a short sheet at the bottom: name, driver, status, speed, where it is, and the tabs. The map stays in view above it, and the truck moves into the part of the map you can see.
  • Tap a tab, tap the handle, or drag the sheet up for everything. Drag it down to make it short again, and down once more to close it. Close still works.
  • While the sheet is open, the map keeps only the zoom and my-location buttons (they move up above the sheet). Find, View, Fleet and the legend come back when the sheet closes. On small phones the search line also steps aside.
  • The bottom tabs stay visible, so you can still move between pages.

Version 4.5.8 (November 2026). Prepared by Franko.

Phones and tablets: iPhone, iPad and Android

  • Every page of every role was tested on an iPhone, a small iPhone (320 px wide) and an Android phone. No page is wider than the screen, and there are no page errors.
  • No more zooming in when you tap a field on iPhone: every field, menu and search box is 16 px on phones. This includes the sign-in page, the home page and the Command dashboard.
  • Notched phones: pages reach the screen edges, and the top bar, bottom tabs and dialog buttons stay clear of the notch and the home bar. The app can also be added to the home screen.
  • Finger-sized controls: buttons, links, the Basic / Advanced switch and the menu buttons are big enough to tap. Taps respond straight away (no double-tap zoom delay).
  • Filter strips and tabs scroll sideways instead of wrapping onto several lines or being cut off. Examples: the vehicle status filter and the Users and roles tabs.
  • Inspections: Pass / Fail / N/A are three large buttons across the full width.
  • Live map on phones: the destination search folds into one line until it is tapped, and the vehicle class legend starts folded. Find and View move under the search line. A new Fleet button opens Fleet overview, Trailers and Live activity as a sheet. Before, phones could not reach these panels. The truck details sheet is now solid, so the map no longer shows through.
  • Fixed: in the Shop queue, a column's description could run over the first truck card. The repeated page title under the top bar is gone. On the smallest phones, the Command dashboard and the company bar no longer run off the right edge.
  • Phones held sideways get slimmer bars.

Live map: choose any truck's or trailer's picture and colour

  • Company administrators and managers select Icons… on the live map, or the pencil next to a trailer in the Trailers window. They can choose a picture and a colour for any truck or trailer, and everyone in the company sees it. Automatic goes back to the picture for its class or trailer type.
  • 20 pictures:
    • Trucks: tractor (semi), box truck, flatbed truck, dump truck, van, pickup, car, bus, equipment.
    • Trailers: dry van, reefer, flatbed, step deck, RGN / lowboy, Conestoga, port chassis (empty), port chassis with container, tanker, end dump, hopper.
  • Trailers now get the matching picture automatically from their type. For example, a reefer shows the refrigeration unit, an RGN the gooseneck, and a chassis the bare frame.

Version 4.5.7 (November 2026). Prepared by Franko.

Live map: icon size

  • Company administrators can change the size of the truck and trailer icons on the live map, for everyone in the company. Use the Icon size control at the bottom left of the map: drag the slider (50% to 200%) or pick S (75%), M (100%), L (130%) or XL (160%). It is saved straight away.
  • The whole icon grows or shrinks together (the picture, the class letter, the license tag and the name), and still points at the truck's real position.

Version 4.5.6 (November 2026). Prepared by Franko.

Live map: vehicle pictures

  • Every truck is drawn as what it is: a tractor (semi with sleeper and stack) for Class A, a box truck for Class B, a pickup for Class D, a van for Class C, and a trailer for trailers. The body takes the class colour (A blue, B amber, D green). A trailer takes the colour of its style. The ring around each picture keeps the status colour, and the picture faces the way the truck is heading.

Live map: Trailers window

  • A new Trailers window in the right rail, under Fleet overview. It lists every trailer with its number and location. The location is the geofence it is in, the truck it is hooked to, or the town.
  • Trailers are colour-coded by style: reefer, dry van, flatbed (also step deck, lowboy, Conestoga), tanker, dump / hopper, container / chassis, other. The style comes from the trailer's type, body type, make and model. Select a style chip to show only that style.
  • Top 5: select Top 5 to choose up to 5 important trailers. They stay at the top of the window, starred, in the order chosen. Each person keeps their own Top 5.
  • Select a trailer to see it on the map. The window can be hidden or shown like the other panels (View menu).

Grade curve: company administrators too

  • Company administrators can now set the driver grade curve, as well as the shop. The Grade curve page is in their menu, and their report cards show the line items.

Version 4.5.5 (November 2026). Prepared by Franko.

4.5.5 is 4.5.3 plus the driver grade curve. The other 4.5.4 changes were withdrawn (live map pictures, Accept load points, the past-year list and the report-card access changes), and everything works as it did in 4.5.3.

Grade curve (the shop only)

  • A new Grade curve page in the Shop menu. Only the shop sees it: the Shop role and the Shop manager role.
  • Choose a driver and add line items: the date; the reason (difficult or annoying to work with, makes excuses not to do things, keeps breaking things, keeps bothering the shop, other, or helpful, goes above and beyond, other); the level (a minor, standard or major deduction or credit of 2, 5 or 10 points, or custom points from −25 to +25); and a comment saying why. Change or remove a line item at any time.
  • Line items move the driver's 0–100 score and grade on Driver scores and on the report cards. Only the shop sees the line items and comments; its report cards add a Grade curve section. Everyone else sees the curved score.

Version 4.5.3 (November 2026). Prepared by Franko.

Fixed: the Admin screens kept the server busy

  • The Admin dashboard, Command center and Server control ask the server for live readings every few seconds. Each reading measured the size of the whole data folder by visiting every file in it: attachments, photos, inspection pictures, caches, backups and company accounts. On a server with many files that took over a second of processor time per reading. With these screens open, it kept the processor at 70–100%, mostly as system time.
  • The data folder size is now measured at most every 15 minutes. The measurement stops after 200,000 files or 3 seconds, and the result is then shown as at least.
  • Who is signed in is read at most every 30 seconds.
  • Server control no longer asks for the program-health part at all (it did not show it).
  • The Command center asks for program health on every tenth reading, refreshes every 2 seconds instead of 1.5, and runs its status checks every 30 seconds instead of 10.

Why is the processor busy?

  • Admin › Server control › CPU now measures one second of processor time and splits it into:
    • programs on this server;
    • system work;
    • waiting for the disk and interrupts;
    • steal: time the hosting provider's hypervisor gives to other virtual machines on the same physical host.
  • It compares that with what the listed processes use, and counts programs started and finished between looks, naming the most frequent.
  • It also notices when the server hides other users' processes from the web server.
  • It then says in plain words where the time goes. For example: the provider takes 60%; something starts 400 programs a second; the database waits for the disk; or processes of another user are hidden, so use top as root.

Lower server load

  • The Fleetio connection saves only what changed. A pass that keeps the program in step with Fleetio used to save every Fleetio record again, even unchanged ones: every work order, part, fuel entry, meter reading and reminder. On a large account that kept the server's processor busy for most of every hour. Now a record that is exactly as it was at the last pass is skipped.
  • Once a day, and after every update, one pass saves every record, so nothing drifts.
  • Part totals and vehicle meters are worked out again only when parts, stock or meters changed.
  • The sync status shows how many records were unchanged.
  • Driver and truck scores read only the chosen period's records, not the whole history.
  • The achievement board is shared for a minute, so many drivers opening it at once count everything only once.
  • Server control › Database: row counts of the tables are kept for 5 minutes instead of being counted again on every refresh. On large tables, such as GPS positions, counting was itself a heavy job.
  • Open screens share one live reading. Two administrators, a wall screen and a second tab now share one reading taken every 2 seconds, instead of each sampling every process on the server.
  • The company account register is checked once per version. Every request used to check its tables and write to it. With many screens open, requests then waited on each other ("database is locked"). It now also lets readers work while something is saved.
  • The database keeps more in memory: an 8 MB page cache, temporary sorting in memory, and the file read through shared memory.
  • PHP keeps the program compiled in memory. The installer turns on and sizes OPcache in 98-fleet-overwatch-speed.ini, unless that file already exists. Without it, every request reads and compiles the program's files again.

New default home location: Mound House, Nevada

  • The default home location is now 69 Moonlite Road, Mound House, Nevada, USA. It applies to new servers and new blank company accounts, and is the map's starting point until a company enters its own address.
  • Company accounts that have entered their own address keep it; nothing is changed for them.
  • The sample company (demo) is unchanged: it still runs around Charleston and Columbia, South Carolina.

Clear list for issues

  • The issue list in Admin › Command center, and the Issues page, now have a Clear list button. It resolves every open and acknowledged issue at once, so the list starts empty.
  • A cleared program error comes back only if it happens again.
  • A cleared health check (for example "site email not set up") stays off the list while it is the same problem. It comes back only if it gets worse (a warning becomes critical), or if it recovers and then fails again.
  • Cleared issues stay under Resolved, with who cleared them in their history. Only server administrators can clear the list.

Fixed errors

  • Call to undefined function worker_age() in the background worker's health check.
  • database is locked on requests from company accounts, such as the truck pictures for drivers.
  • SplFileInfo::getSize(): stat failed in Admin status checks, when a temporary file disappeared while the data folder was being measured.

Version 4.5.2 (November 2026). Prepared by Franko.

Driver scores in every department

  • Driver scores is now in every department's menu: Dispatch, Maintenance, Shop, Safety, Finance, Drivers, Overwatch and Admin.
  • Managers and administrators open a driver for the details and report cards. An administrator can let other roles do so in Grading settings.

Achievement board

  • Rank titles and levels for drivers, from Rookie to Hall of Fame, built from XP.
  • Ten medals in bronze, silver, gold and platinum: inspections (DVIRs), problems reported, miles, loads volunteered, on-time deliveries, hours on duty, days without damage, smooth driving, low idling and loads delivered.
  • A podium for the top three and leaderboards for each medal.
  • Each driver's own card: their rank, level, XP bar and place.
  • Drivers and every department see it. It shows only positive numbers.

100 themes

  • 50 new themes:
    • Tech: Circuit board, Hologram lab, Light-cycle grid, Data center, Quantum, Mainframe, Cyberdeck, Satellite uplink, Robotics plant, AI core.
    • Trucks: Big rig chrome, Night highway, Diamond plate, Truck stop diner, Diesel shop, Long haul sunset, Logbook, Hazmat.
    • Truck dashboards: amber gauges, blue cluster, digital LCD, CB radio.
    • Boards: Chalkboard, Blackboard, Whiteboard.
    • Casino: Slot machine, Jackpot, Casino night, Neon strip.
    • Arcade: Pinball, Alien shooter, Maze chase, Fighting game, Arcade racer, Block stacker.
    • Dark and gothic: Gothic, Vampire manor, Cathedral, Witching hour, Raven.
    • Nature and places: Jungle canopy, Mountain pass, Night city, Tropical night, Zen garden, Cosmic nebula.
    • Style: Art deco, Pop art, Pastel paper, Field ops.
  • New frames: circuit board, chrome trim, diamond plate, lined paper, backlit truck dashboard, chalkboard with a wooden frame, casino gold with marquee buttons, gothic.
  • New animated backgrounds, including:
    • circuit traces with pulses, light-cycle trails on a neon grid, blinking server racks;
    • a highway with lane lines and taillights, dashboard gauges with a turn signal;
    • chalk doodles and dust, marquee bulbs, spinning reels, playing cards, neon signs;
    • 8-bit invaders, a maze chase, falling blocks;
    • candlelight, stained glass, mist, feathers, a nebula and art deco rays.
  • New sound sets: diesel horn and air brakes, turn-signal ticks, chalk on a board, slot-machine coins.
  • Holiday themes now play their own animated scenes:
    • Christmas: snowfall, string lights and a sleigh.
    • Halloween: bats, ghosts, jack-o'-lanterns, fog and a moon.
    • Thanksgiving: maple leaves.
    • Fourth of July: fireworks and stripes.
    • New Year: fireworks, confetti and sparkle.
    • Valentine's: hearts and petals.
    • St. Patrick's: a rainbow, coins and clovers.
    • Easter: butterflies and petals.
    • Hanukkah: a menorah and stars.
    • Lunar New Year: lanterns and fireworks.
    • Day of the Dead: banners, marigolds and candles.
    • Winter: snow under an aurora.
  • On phones, scenes keep clear of the bottom menu bar and use fewer pieces. They are drawn sharp on high-resolution screens.

Version 4.5.1 (November 2026). Prepared by Franko.

Driver scores count more

  • Work orders on the trucks a driver drove count against them. This covers unplanned work orders in the days before the work order (3 days by default); a shared truck is split by days driven. Preventive maintenance, recalls and customer requests never count.
  • Samsara safety events count against the driver, weighted by kind:
    • harsh braking, acceleration and turns;
    • speeding, distraction and phone use, no seat belt, following too close, rolling stops, drowsiness, lane departure;
    • crashes, and a blocked or obstructed camera.
  • Samsara alerts sent to the program's webhook (for example Camera blocked) are counted too, each once. Events dismissed in Samsara do not count.
  • The analysis and report card list the safety events and the work orders. Planned work is marked as not counting.

Grading settings and resets

  • Grading settings let company administrators change how drivers and trucks are graded:
    • the weight of each part (0 switches a part off);
    • what each thing takes off, and the weight of each kind of safety event;
    • idle limits, the work order window and the repair reasons that never count;
    • grade limits and points.
  • Everyone else can read the settings.
  • Reset scores for every driver at once, for one driver, or for one truck: scoring starts again from now. No record is deleted, every reset is listed, and each one can be undone.

Truck scores

  • Every truck gets a grade from reliability (unplanned repairs, issues and faults per 10,000 miles), maintenance cost per mile, use, uptime, idle, safety events and inspection defects.
  • Each truck has an analysis with a month-by-month table, and a truck report card as PDF and Word.

Live map: classes and shipments

  • Every truck carries its class letter in its class colour: A blue, B orange, C purple, D green. The class comes from Driver must hold, then the weight, then the type.
  • The tag below each truck shows the driver's license class (CDL A, B, C or Lic D), in red when it does not cover the truck.
  • Vehicle classes legend: hide or show each class, and show shipments. Open loads appear at their pickup and loads on the road at their destination, with a line from the truck.
  • On the map on the shipment board opens it.

Version 4.5.0 (November 2026). Prepared by Franko.

Shipment board

  • Dispatch posts shipments for a vehicle class with where to pick up and where to deliver (pick-up and deliver-by times, miles, weight, pieces, priority and notes are optional).
  • Drivers see the board live, in three columns: needs delivering, on the road and delivered. It filters to the class of the driver's truck and refreshes by itself.
  • Take this load: the dispatcher who posted it is told at once, with a bell notification, an email when company email is set up, and an automatic message from the driver in Messages. Only one driver can take a load.
  • Drivers mark loads Picked up and Delivered, or Give back before pickup.
  • Dispatch can edit, assign, put back on the board or cancel a load. Each shipment has a history.
  • Shipment log: who took which load and every step. It shows loads per driver per shift (a run of loads with no 10-hour gap) and per week, volunteered against assigned, delivered and given back. It downloads as CSV.

Driver scores and report cards

  • Every driver gets a score and a grade (A to F) with points. The score is built from:
    • time on duty, miles, trips, idle time and idle events (Samsara and the trucks they were assigned);
    • loads volunteered and assigned, and on-time deliveries;
    • issues on the trucks they signed into (issues they reported count in their favour);
    • driver-damage and operator-error repairs, accidents (preventable weigh most) and inspections;
    • evaluations (managers and administrators only).
  • Full analysis per driver:
    • each part of the score and what it is based on;
    • score by month and by week;
    • month-by-month and week-by-week tables;
    • every record behind the numbers.
  • Report cards for every driver who signed into a truck in a year, as PDF and Word.
  • Drivers see their own score (My score) and their own report card.

50 themes, each with its own identity

  • 8 new animated themes: Northern lights, Deep sea, Volcanic, Desert dusk, Code rain, Blueprint, Race day and Forest trail. Ocean, Amber, Violet, Vaporwave, Superhero and Frozen tundra are full looks now.
  • Each themed look has its own:
    • lettering (heading and body fonts, plus a text effect);
    • layout (the shape and spacing of cards, buttons and windows);
    • frame (HUD brackets, CRT terminal, neon, pixel, holographic, stencil, comic panels, film grain, brass, parchment, frost, holiday ribbons and others);
    • motion (how screens and windows come in);
    • animated background (stars, snow, embers, bubbles, rain, leaves, petals, code rain, aurora, a neon grid, fireworks, lanterns and more);
    • sound set (made in the browser; the Sounds switch turns them on or off);
    • map tint.
  • Business themes stay clean and quiet: Standard, Light, Ocean, Amber, Violet and Blueprint.
  • Animations: Full / Subtle / Off in the Themes panel. Reduced motion is respected, and the background pauses in hidden tabs and uses less on phones.
  • Iron Man is renamed Armor HUD (themes use style names only).

Interface

  • Screens now animate gently throughout: blocks come in one after another when a screen opens, windows and record panels slide in, pop-ups rise, and buttons respond to presses.
  • Every screen was checked on a phone (390 pixels wide) and a desktop. The one screen that ran wider than a phone, Moderation rules, is fixed.

Version 4.4.5 (November 2026). Prepared by Franko.

Everything from Fleetio, accounted for

  • Admin › Data integration log (Data): for each kind of data the last sync read — vehicles, contacts, vendors, service tasks, equipment, parts, stock per location, issues, work orders, service history, service reminders, renewals, fuel, meters, expenses, purchase orders, inspections, and the other Fleetio lists (assignments, part locations, service programs, inspection forms, groups, labels, documents, photos, comments, faults, charging, users) — how many records were read from Fleetio, saved, failed, not saved, left out on purpose (such as fuel entries voided in Fleetio) and are here in total.
  • Every problem is listed with the reason — the error, or why a record could not be saved (for example "Its vehicle (Fleetio 599) is not here yet") — how often and when, and Fleetio's record itself. Retry reads that one record again from Fleetio and saves it; Resolve and Ignore with a note; Retry all shown; Export as CSV. A problem closes by itself when the record saves on a later sync.
  • A list Fleetio refuses for the API key (HTTP 403) is listed with what to do; a list the account does not have is skipped.
  • Every Fleetio record is kept in full, all its fields as Fleetio sent them (secrets masked), so nothing is lost even where a field has no column here: a record's Fleetio data tab shows them.
  • Imports with refused rows are listed on the same page, with their report of reasons per row.

Current status follows Fleetio

  • Work orders, issues, purchase orders, renewals, service history, fuel, meters, expenses, inspections and service reminders follow Fleetio: their status, dates and totals are Fleetio's on every sync, also after someone changed them here. Vehicles follow Fleetio's status, meter and group; other vehicle details changed here are still kept.
  • Work order lines are read again whenever the work order changes in Fleetio (tasks and parts added or changed there arrive, without copies); Fleetio's own work order totals are kept.
  • Sync now on the log page starts a sync within a minute.

Version 4.4.4 (November 2026). Prepared by Franko.

Add part: scan to fill in

  • The New part form starts with 📷 Scan to fill in: scan with the camera or a handheld scanner, or type a code and press Enter. Everything can still be typed by hand.
  • Packaging QR code (Grote EZ-Find and other codes holding a web address): the part number, manufacturer part number, description, manufacturer and picture are filled in from the maker's page.
  • Barcode (UPC / EAN): the UPC is filled in, and the description, manufacturer, model number and picture come from a barcode database (UPCitemdb's free lookup unless an administrator sets another; Automation and AI › Part lookup switches it off). A barcode the database does not know fills the UPC and asks for the QR code or the name.
  • A part you already have (by number, UPC, alternate number or label code) is offered — Open it — instead of making a copy.
  • The picture is downloaded and saved as the part's main picture when you save the part.

Version 4.4.3 (November 2026). Prepared by Franko.

Full transfer from Fleetio

  • Stock from the Fleetio connection: Fleetio keeps quantities per part and location in its Part Location Details, not on the part, so the connection brought parts without quantities. It now reads them: quantity on hand, aisle, row and bin, reorder point, maximum and Track Inventory, for every location. The field names Fleetio sends are kept, and the Inventory overview shows what the last sync brought (Fleetio connection: stock).
  • Fleetio's custom fields come across: each becomes a field here (made the first time), with its values.
  • Import columns without a place become new fields (administrators' imports), named like the column, so nothing in a file is dropped; the preview lists them first. Importing the same file again reuses them.
  • Checked with today's Fleetio part export: 3,429 lines, every Total Quantity the same as in Fleetio, every part's total the sum of its lines. (In Fleetio's own export 1,520 of the parts have no quantity: blank where Track Inventory is off, 0 where it is on; they show the same here.)

Service reminders

  • Service done in Fleetio completes the reminders here: a synced service entry now updates this program's own reminders for the same truck and task (last done, next due), so a truck is no longer due here for work Fleetio shows as done.
  • A reminder here that duplicates a Fleetio reminder (same truck and task, from a service program or an older import) is archived; Fleetio's stays.

Work orders: Scan parts

  • 📷 Scan parts (a tab of every open work order, and a button at the top): scan with the camera or a handheld scanner, or type. A barcode, UPC, part number, alternate number or label code adds the part with its price; scanning it again adds one more.
  • Manufacturers' QR codes (Grote EZ-Find and other packaging codes with a web address): the page is read for the part number, name, maker and picture. Your part with that number is used, or a new part is made with all of it filled in, its picture saved, and put on the work order.
  • An unknown plain number is not made into a part (a misread would be); Look up opens Part lookup with it.

Version 4.4.2 (November 2026). Prepared by Franko.

Fleetio service reminders

  • They follow Fleetio again. Fleetio's current API names its fields differently, so the next due date, the interval unit (6 months had become 6 days), due soon (days and miles) and snoozes were not updated. All are read now, with the older names still understood.
  • Fleetio is the record for its reminders: a change made in Fleetio is applied here even when someone touched the reminder here, and Fleetio's status (OK, due soon, overdue, snoozed) is the one shown while Fleetio is connected.
  • A value Fleetio cleared is cleared here (an ended snooze); a reminder deleted in Fleetio is archived here.

Fleetio part export

  • Maintenance › Parts by location: line for line like Fleetio's part export, one line per part and location, with Fleetio's 26 columns in Fleetio's order, search, and Export in Fleetio's format. Checked with a real export: 3,429 lines and 26 headings match.
  • The import summary says what happened: Fleetio writes a line per part and location, so lines that are another location of a part are counted as such (nothing is lost).
  • Fleetio's first Last Used column is UTC and is now read as UTC (times were 4 to 5 hours off).
  • Files saved again in Excel import like the original: Unicode text (UTF-16, tabs), Windows CSV (Windows-1252), tab-separated and .xlsx. Quotes are read the standard way (a backslash is just a character).

Manual

  • The Installation and setup section is no longer in the user manual. Installing, the server, the database, the worker and upgrading are in docs/INSTALL-SETUP-OPERATIONS-GUIDE.md in the package. Copy from other platforms and Connecting Samsara, Fleetio and other services moved to Administration.

Version 4.4.1 (November 2026). Prepared by Franko.

Automation and AI — see Automation and AI

  • Admin › Automation and AI: every automatic tool and every smart tool in one place, each with a switch: the assistant, reading invoices and documents, recommended services, part lookup and pictures, workflow rules, automated work orders, part prices on work orders, service and renewal reminders, low-stock notices; and for the server administrators the server's own (automatic fixes, automatic IP blocking, admin alerts, collecting issues, measuring requests, visitor locations, each part of the background worker).
  • A switched-off tool stops on the server, not only on the screen; its screens leave the menu.
  • Server administrators decide which tools companies may use (Allowed for companies); each company switches its own.

Inventory — see Parts, stock and inventory

  • Inventory overview rebuilt as a dashboard: stock value, parts, tracked, in stock, on purchase orders, allocated; at or below the reorder point, out of stock, no price, possible duplicates, tracked without a reorder point; not used in 12 months, never used, in stock without a bin, no picture, no manufacturer. Every number opens the parts behind it (search, open the part, export CSV).
  • Locations (value, low, out, no bin — select one for its parts), the reorder list, the highest stock values, parts used per month, categories and manufacturers.
  • Fleetio fields: every column of Fleetio's part export with how many of your parts have it. Checked with a real Fleetio export of 3,429 rows: every part, every part-and-location row and every quantity arrived.
  • The Inventory menu starts with Inventory overview, Parts and Part lookup.

Part lookup and pictures — see Part lookup and pictures

  • Maintenance › Part lookup: type a number or scan it (camera, or a handheld USB or Bluetooth scanner): your part is found by its number, alternate numbers, manufacturer number, UPC, Fleetio ID or label code.
  • Lookup sites: Grote EZ-Find (the number is copied so you paste it in EZ-Find's search box), a web search and a picture search, and any site you add ({q} where the number goes).
  • Pictures: from a web address (a picture, or a product page whose main picture is taken), a file, a photo, or pasted from the clipboard. The source is kept with the picture. Private and this server's own addresses are refused.
  • On a part: Picture and Look up under More actions.

Server administration — see Server control

  • Admin › Server control: live CPU, memory, disk, network, connections, processes and uptime; every reading opens its detail; services (restart, reload, start, stop), reboot, the background worker, maintenance mode, clear caches and temporary files, trim logs, optimize the database, run health checks, back up now, sign everyone else out, security and automation at a glance, and a console of what you did. Root actions go to the server helper with your password; everything is in the audit log.
  • Command center: every gauge and number opens its window — CPU shows every process running (search, sort, CPU per core, by user, end a process), memory, disks and the data folder, network (open ports, busiest addresses, block one), who is signed in, the database, the system and PHP, the worker.
  • Admin menu reorganized: Overview, Server control, Security, Automation, Website and sign-up, Companies, Email, Data, Setup.
  • HUD look: a futuristic look for the Admin section (grid, glow, monospace readouts); switch it in Server control.

Manual

  • The article Installing Fleet OverWatch is no longer in the owner's manual (installing stays in docs/INSTALL-SETUP-OPERATIONS-GUIDE.md and docs/INSTALL-NEW-SERVER.md in the package).

Version 4.4.0 (November 2026). Prepared by Franko.

Corrections

  • Delete all inventory works again: the button never turned on (its two input handlers had slipped into a code comment).
  • Parts on work orders take their price. A part added at $0.00 takes the item's unit cost, else its average or last cost, else the last price it was received at — also when it is chosen by one of its part numbers (which used to leave it at $0.00). Lines imported from Fleetio with a total but no unit price take total ÷ quantity, and every name Fleetio uses for the unit cost is read. Existing $0.00 lines whose part has a price are repaired once, and their work order totals worked out again.

Server administration (server administrators) — see Server administration

  • Issues: everything wrong on the server in one list (failing health checks, automatic-fix incidents, program errors, automatic IP blocks), each with severity, component, times, diagnostics, stack trace and history; acknowledge, add notes, resolve, reopen, run the fix now, resume held fixes. Also at the top of the Command center.
  • IP access: block and trust addresses and ranges (CIDR), with reasons and end dates; automatic blocking after repeated failed sign-ins, recovery floods, refused requests and attack-path probing, for longer each time; every event kept 90 days; never your own address; worker.php ip-unblock from the shell.
  • What uses the CPU: the busiest processes now (what each one is) and the operations and companies that used the most CPU time.
  • Admin alerts: which events reach you in the program and by email (security, health, errors, updates, registrations, backups), from which severity, extra addresses, a test.
  • The Command center refreshes faster (live every 1.5 s, checks every 10 s); the Server page every 2 s.
  • Landing page: every text of the public page, a notice at the top, and which parts show, without touching the code.
  • Company registrations: by invitation (the new standard) — a request, you approve it, an invitation code is emailed (expires, works once, revoke, resend), the code creates the account; you are told about requests and new accounts. Or open sign-up, or closed.

For every company

  • Automated work orders (Maintenance): when a driver inspection (DVIR) fails or is submitted, an issue or critical defect is reported, service comes due, a fault code arrives, a tire wears out, a vehicle goes out of service, or on a schedule — with the status, priority, reason, technician, due date, service tasks and details you choose. One open work order per record; every run logged. See Automated work orders.
  • Barcodes and QR codes: Scan a code (camera or handheld scanner) opens the record; Labels and codes prints QR and Code 128 labels for vehicles, equipment, parts, work orders, part locations and tires in three sizes; own label codes. See Barcodes and QR codes.
  • Customize menu: rename sections, groups and items, move and hide items, for your company only (Admin › Menu and sections).
  • Pages to switch off per role or per person (Admin › Users and roles › Data access); their screens' API is closed too.
  • Themes panel in four tabs (Looks by category with a search, Colours, Saved themes, Company), each scrolling on its own; full screen on phones.
  • Work order windows: the main actions stay in view, the rest under More actions (Add, Work, Share and copy); part lines become small cards on phones.
  • Installation, setup and operations guide: one complete guide (docs/INSTALL-SETUP-OPERATIONS-GUIDE.md and in the manual).

Version 4.3.24 (October 2026). Prepared by Franko.

  • Email servers (SMTP). See Email servers and password recovery.
    • Admin › Email server (each company's administrators): the company's own server for its alerts, summaries and notices. Ready-made settings for Gmail / Google Workspace, Microsoft 365, Outlook.com, Yahoo, iCloud, Zoho, AOL, SendGrid, Mailgun, Amazon SES and Brevo, or any server; SSL/TLS or STARTTLS; From name and reply-to; who receives alerts; Send a test message shows what the server answered.
    • Or use the site's email server (when the server administrators share it), or don't send email.
    • Admin › Site email server (server administrators): the server's own email for password recovery, account confirmation, contact messages and platform notices.
    • Saved passwords are never shown again.
  • Forgot your password? on the sign-in pages emails a single-use link (valid one hour) to choose a new password, for company users and server administrators.

Version 4.3.23 (October 2026). Prepared by Franko.

  • Evaluations: any name. The person evaluated can be anyone: pick them from the list, or type any name (a new hire, a contractor, someone without a sign-in). Schedules and hand assignments take typed names too. See Evaluations.
  • Evaluations: PDF and Word. ⬇ PDF and ⬇ Word on an evaluation download it ready to print, with every answer, comment, score and signature lines. Each download is in the evaluation's log.
  • Blank forms to print: Forms › PDF or Word downloads a form to fill in by hand, with tick boxes and room to write.

Version 4.3.22 (October 2026). Prepared by Franko.

  • Vehicle fuel type and gas grade. See Vehicles.
    • Fuel type is a drop-down: Gas, Diesel, Electric, Hybrid, Propane or Natural gas.
    • Gas and hybrid vehicles also have a gas grade: Regular, Midgrade, Premium, E85 or Ethanol free. Other fuel types have no grade.
    • Existing Gasoline vehicles become Gas and CNG becomes Natural gas (also in fuel entries and the Fuel type list). Imports and Comdata use the new names.
  • Halloween theme decorations: bats flying across the screen, a spider on its thread, cobwebs on panels and pages, a moonlit graveyard with flickering jack-o'-lanterns, pumpkin headings and candy-corn buttons. The motion stops if your device asks for less motion.

Version 4.3.21 (October 2026). Prepared by Franko.

  • Twenty more themes in More themes (bottom of the menu). See Preferences, themes and mobile use.
    • Film styles: Cyborg hunter, Alien invasion, 90s hacker, Galactic rebellion, Galactic empire, Starship bridge, Dinosaur park, Time machine.
    • Holidays: Christmas, Halloween, Thanksgiving, Fourth of July, New Year's Eve, Valentine's Day, St. Patrick's Day, Easter and spring, Hanukkah, Lunar New Year, Day of the Dead, Winter holidays.
    • Each has its own colours, background, lettering, map tint and corner label. Holidays are in their own group in the menu.

Version 4.3.20 (October 2026). Prepared by Franko.

  • Server administrators reset a company's sign-in in one step. See Server administrator tools.
    • Where: Company accounts › Action › Reset company code and passwords…, or from Users (all companies).
    • What: a new company code, and new passwords for one user, all administrators or everyone.
    • The new passwords are shown once and never logged. The people choose their own at the next sign-in, and the company can be signed out at once.

Version 4.3.19 (October 2026). Prepared by Franko.

  • Comdata fuel cards (Integrations). See Integrations.
    • Comdata transactions become fuel entries on the right truck: gallons, price, total, station, state for IFTA, odometer, driver and the card's last 4 digits.
    • Other purchases can become expenses.
    • Upload an iConnectData report (CSV), connect the Comdata API (OAuth client id and secret, API key, or user name and password), or have transactions pushed in.
    • Each transaction is added once. Unknown units wait for you to choose the truck, and can be remembered.
    • Full card numbers are never stored.
  • A picture for each vehicle, shown as its icon in the Vehicles list, at the top of its window and in the live map's vehicle window.
    • Add it with 📷 Picture, by selecting the picture in the vehicle's window, or in the vehicle form. See Vehicles.

Version 4.3.18 (October 2026). Prepared by Franko.

  • Bulk tire orders. See Tires.
    • Receive (bulk order) takes the order total and the number of tires and works out the cost per tire. The cents are shared so the tires add up to the total.
    • Every tire received becomes its own tracked tire, In stock, with its cost, PO and serial.
    • Mounting, issuing, transferring and scrapping use those tires, so none is counted twice.
    • The new Tires one by one tab lists them.
  • Photos and PDFs on bulk tire stock: 📷 Add photo and 📄 Upload PDF on the record and in its form, and the invoice in the Receive form.
  • Tools for the server administrators (Admin › Service platform). See Server administrator tools.
    • Users (all companies): find anyone; turn off or on, sign out, temporary password, reset two-step, unlock.
    • Announcements and maintenance: banners for companies, this server, website or demo visitors, scheduled or not. Maintenance mode pauses company accounts (and, if chosen, sign-ups and the demo) with your message.
    • Moderation rules: words not allowed in every forum (refuse or mask), members banned from posting, email addresses and domains refused for sign-up and the contact form.
    • Usage and limits: storage, users, vehicles and records per company, with storage, user and vehicle limits.
    • Server tidy-up: clear the code cache, remove expired demo copies, temporary files and old erase copies, sign everyone out, and a diagnostics file without secrets.

Version 4.3.17 (October 2026). Prepared by Franko.

  • The driver roster has one line per truck. See Driver roster.
    • + Add line puts a truck on the roster with the driver assigned to it.
    • Each line has its Class (Class A, B or D), Manual or Automatic, Day cab or Sleeper, and its certificates: tick IFTA and any others, each with an optional expiry date. You can also add certificates of your own.
    • Edit changes a line; Remove from roster takes it off. + New driver adds a driver from the line.
    • Filter by class, transmission or cab.
    • Administrators, managers and the shop see a warning when a driver's license class does not fit the truck's class.
    • The truck's operator follows its line. When a driver cannot be assigned (for example an expired medical card), nothing is saved and the reason is shown.

Version 4.3.16 (October 2026). Prepared by Franko.

  • Driver roster (Team menu, every section). See Driver roster.
    • Every driver, their phone and the truck (and trailer) they drive.
    • The truck's certificates: IFTA decal, registration, insurance, annual DOT inspection, permits and more, each green, orange or red by its expiry.
    • Everyone sees it. Administrators, managers and the shop assign trucks, change phones and notes, add and renew certificates, and add drivers.
    • The CDL and medical card dates show to those three only.
    • The live hours page of the Drivers section is now called Live driver status.
  • Contact form on the website. See Contact form and messages.
    • Visitors send their name, email, phone, company, job title, fleet size, topic, how and when to reach them, and their message.
    • It arrives in Admin › Contact messages for the server administrators, rings their bell, and is emailed when email is set up.
  • Admin › Erase records. See Erase records.
    • Erase all inventory, vehicles and equipment, work orders and issues, contacts and vendors, or every fleet record.
    • Each asks twice (a tick, then the phrase and your password) and keeps a copy you can put back.

Version 4.3.15 (October 2026). Prepared by Franko.

  • The demo works like a normal account, with sample data.
    • The top bar is the account bar of a company account: the company name, a small Sample data mark, your job, Switch role, Start over, your name (My account) and Sign out. On a phone they are in one menu under your name.
    • My account works as on a real sign-in: your picture, profile and theme. Password, two-step sign-in and sessions belong to a real sign-in, so they are only described.
    • Sign out leaves the demo for the home page.
    • Admin shows the same Admin menu as a company administrator.
    • No "DEMO MODE" strip, no "Demo" in page titles or on the dashboard, and no welcome pop-up. The administrator is a person of the company (Avery Cole).
    • The guided tour is still there for managers and administrators.

Version 4.3.14 (October 2026). Prepared by Franko.

  • Fixed: the demo said "redirected you too many times" when a section was opened on a hosting server (a server for company accounts).
    • The demo now decides what each role may open by its own rules: the driver their screens, the shop the shop, and so on.
    • It no longer uses the hosting server's own settings, which open no fleet sections.
    • A section a role does not have now takes you to that role's own screens in one step.

Version 4.3.13 (October 2026). Prepared by Franko.

  • The demo shows the user side. It opens on Try it as one of the team: Driver, Shop lead, Dispatcher, Safety manager, Controller, Owner / fleet manager or Administrator. Each is a person of the sample company, with exactly their screens and rights. Switch role is in the demo bar, and the landing page has Try it as buttons.
  • Admin › Demo roles (server administrators) chooses which roles are offered on the landing page and in the demo, the one the demo opens on, and whether the landing page lists them.
  • The What's new card closes by itself after 3 seconds. It waits while the pointer is on it.

Version 4.3.12 (October 2026). Prepared by Franko.

  • A cleaner Command dashboard.
    • Charts keep readable lettering at every screen size, with whole-number axes (no more "$1, $1, $1, $0") and a clear note when a chart has nothing to show.
    • Empty cards are compact, with a small icon, instead of tall blank boxes.
    • A long Needs attention list scrolls inside its card instead of stretching the row.
    • Card titles stay on one line. On a tablet the last card of a row fills the width instead of leaving a gap.
    • More themes is styled like the rest of the menu.
    • The fleet status bars show In Storage and Off-site Storage.

Version 4.3.11 (October 2026). Prepared by Franko.

  • Vehicle status drop-down. The status on the vehicles list and on the vehicle is a drop-down: Active, In Shop, Out of Service (asks why), In Storage and Off-site Storage, plus your own. It is saved at once and kept in the status history. A vehicle in storage cannot be assigned or dispatched. New quick filters: In storage, Off-site storage.
  • More themes. More themes at the bottom of the menu adds 13 looks in the style of popular films, games and music:
    • Synthwave sunset, Vaporwave, Retro arcade, Hacker terminal, Space opera, Wasteland, Comic book;
    • Film noir, Steampunk, Zombie outbreak, Fantasy kingdom, Superhero, Frozen tundra.
    • Most come with their own background, lettering and map tint. They are original styling: no franchise names or artwork.
  • Delete all inventory (administrators). It is in the Danger zone at the bottom of Parts and inventory and asks twice: a tick box, then the phrase DELETE ALL INVENTORY and your password. A copy is kept and Restore deleted inventory puts it back. Work orders, purchase orders and invoices are kept.
  • The side menu in groups and sub groups, colour coded.
    • Each group opens and closes (remembered) and has the colour of its kind of work: operations, fleet, maintenance, safety, inventory, finance, team, setup.
    • Related items are gathered in sub groups. Key ones are highlighted by importance: Critical (problems, work, inspections) and High (what is due, dispatch, compliance, approvals).
    • Menu colours at the end has the legend and a switch back to the plain list.

Version 4.3.10 (October 2026). Prepared by Franko.

  • Evaluations: results for managers only.
    • Only managers and administrators see scores, ratings, answers and photos.
    • The writer sees that it was submitted. The person evaluated no longer sees it and is not told.
    • Only administrators delete evaluations; a submitted one needs a reason, kept in the audit log.
  • Forms customized by the administrators. Only administrators change forms now. New question types: one of a list (your own choices) and number. Questions can have help text and be moved up.
  • Evaluation schedules and timers (administrators). Evaluations › Schedules sets:
    • who is evaluated (roles, chosen people or everyone);
    • who fills it in (one person, anyone with a role, or a self-evaluation);
    • how often, from a start date, and how long they have;
    • a reminder before it is due, and an optional time limit once opened.
  • To do, with timers. Everyone has To do with a countdown for each evaluation assigned to them. Overdue ones tell the administrators and can still be done (marked late). Assignments are listed for managers; administrators can also assign by hand, extend and cancel.
  • Company bulletin board (Team › Bulletin board): updates from the administrators.
    • Categories, Normal / Important / Urgent, pinned, for some roles only.
    • A publish date and an expiry date; photos and PDFs.
    • "Must be acknowledged", with the list of who read and acknowledged.
    • The board's name, introduction, categories and colour are the administrators' to change. A red number in the menu counts what you have not read.
  • Time off and call-outs (Team › Time off): a calendar of who is off (month and list, Off today).
    • Anyone requests time off or reports a call-out; managers approve or deny, and everyone is told.
    • Everyone sees who is off, not why. Managers can enter time off for anyone; administrators keep the list of kinds.
  • Forums: Reply on each message. A reply quotes the message it answers and tells its author, in both the Company forum and the Site-wide forum.

Version 4.3.9 (October 2026). Prepared by Franko.

  • Forum moderation.
    • Company forum: a 🛡 Moderation button for its administrators and managers. Tabs: Reports, Topics, Hidden, Members and mutes, Log.
    • Managers and administrators can pin, lock, hide, move a topic to another channel and dismiss reports.
    • Only administrators can delete for good and mute a member for 1, 3, 7 or 30 days or until lifted. A muted member can still read the forum but cannot post.
    • Site-wide forum: the same tools, for the server administrators only.
    • Admin › Forum moderation (server administrators): the site-wide forum and every company's forum, with open reports, and full moderation of each. Their actions show in that company's log.
    • Every action is in the moderation log and the audit log.
  • The What's new card scrolls on short screens instead of running off the top.

Version 4.3.8 (October 2026). Prepared by Franko.

  • Photos and PDFs on work orders.
    • In the work order form, under Photos and PDFs: 📷 Add photo (on a phone the camera opens) and 📄 Upload PDF (estimates, invoices, diagnostic reports, warranty papers). Each gets a category.
    • On a new work order, the files go up when you save it.
    • The work order itself has the same buttons. Photos are on its Photos tab and PDFs on its Files tab.
  • Site-wide forum. A forum shared by every company on the server, switched on for everyone. It is in the Team menu as Site-wide forum, and the Company forum has a button to it. Each company's own forum is now called Company forum and stays private to that company. Posts show the person's name and company. A server administrator can turn the site-wide forum off.

Version 4.3.7 (October 2026). Prepared by Franko.

  • The company bar no longer covers anything. In a company account, the bar with the company name used to sit over the top of the window. Everything pinned there now starts below it: the dashboard header with the alerts bell, the alerts pill and tray, notices, record panels, dialogs and chat.
  • Every page fits the window, without the bottom cut off.
  • On a phone the company bar shows the company name and one menu: My account, config file, settings, Start over, Sign out.
  • A company account never says "demo". It opens at app.php instead of demo.php; old links and bookmarks still work and land on the new address. If the account started from the sample company, its sample names are renamed once:
    • Demo Yard becomes Main Yard;
    • the sample sign-in "demo" becomes "sample.admin";
    • sample records show "sample-data" instead of "demo-seed".
    • "Demo" now appears only in the open demo.
  • The side menu fits short screens. Menu items keep their full size and the whole menu scrolls when needed. Notifications, Messages and Sounds sit side by side, and nothing is cut off at the edge.

Version 4.3.6 (October 2026). Prepared by Franko.

  • Evaluations, in the menu of every section (under Team), with a tab for each department evaluated: Drivers, Dispatch, Shop and maintenance, Safety, Finance and billing, Office and administration, Management.
    • The driver evaluation has sections for Vehicle cleanliness, Driver attitude, Safety and compliance, Reliability and communication, and Equipment care. Every other department has its own form and questions.
    • Each question takes a rating (1-5, or N/A) and a comment. Add photos under any section (camera on a phone). Overall comments, strengths and what to improve.
    • A score per section and overall, and a rating: Excellent, Good, Needs improvement, Unsatisfactory.
    • Every evaluation is numbered, saved and logged, linked to the person (and to the driver's contact record), and locked once submitted. The person is notified, reads it and acknowledges it.
    • Submitted evaluations are never deleted: archive and restore them, and search by user name or name, archive included.
    • Forms: each department changes its own questions; old evaluations keep the questions they were written with.
  • The landing page no longer shows server setup (installation links and the "Runs on your server" card).

See Evaluations.

Version 4.3.5 (October 2026). Prepared by Franko.

  • The parts list has Fleetio's columns: a column for every column of Fleetio's part export, in the same order (Last used, Fleetio ID, Part, Location, Description, UPC, Category, Manufacturer, Manufacturer part number, Reorder point, Total quantity, On active purchase orders, Allocated to work orders, Measurement unit, Aisle/Row/Bin, Aisle, Row, Bin, Track inventory, Unit cost, Tire size, Associated vehicles, Linked service tasks, Created on, Updated on), plus the photo.
  • Fleetio's part export imports as it is. One row per part and location; quantities, shelf places and Track inventory per location; long descriptions kept whole; Fleetio's dates kept. Importing it again updates the parts.
  • Part photo in the form: Add photo in the new-part form and when editing; on a phone it opens the camera.
  • Vehicles a part is for: in the part form and on the part's Vehicles tab. A work order on one of those vehicles lists the part first.
  • Track inventory: off for shop supplies bought as needed; their stock is not counted and they are never low. Each location can be set on the part's Stock tab (edit), with its Aisle, Row and Bin.
  • Parts invoices: Upload invoice on the parts list, on a part or in the part form. Photos or a PDF are read, each line matched to a part, you check them, then Receive into inventory. The invoice stays on every part on it (Invoices tab) and in Maintenance › Parts invoices.

See Parts and inventory.

Version 4.3.4 (October 2026). Prepared by Franko.

  • Issues and inspection defects on work orders, as in Fleetio. The work order form has Issues and inspection defects to fix: the vehicle's open issues and its unresolved inspection (DVIR) defects, each with a box to tick.
    • On a new work order, the ticked ones are put on it when you save it. On an existing one, each tick is saved at once.
    • On the Tasks and parts tab, use + Issues and inspection defects….
    • An issue already on another open work order is shown but cannot be ticked.
  • Completing the work order resolves everything on it. The issues are resolved, their inspection defects are marked fixed, and an inspection report with no defect left open is signed off ("All defects fixed on work order #…"). Reopening an issue reopens its defect.

Version 4.3.3 (October 2026). Prepared by Franko.

  • Parts from inventory in the work order form. New and existing work orders have a Parts from inventory section with + Add part from inventory. Choose the part, the location (on hand shown), the quantity and the unit cost.
    • On a new work order, the parts are added, and taken out of stock, when you save it.
    • On an existing one, each change is saved at once.
  • Completed work orders take parts too, as in Fleetio. Parts added there leave the stock count at once.
  • The buttons now say + Add part from inventory everywhere.
  • After an update, administrators, managers and shop users see once which version is running and what changed.

Version 4.3.2 (October 2026). Prepared by Franko. Everything in the FleetOverwatch fleet management system reference: the developer side (API and webhooks) and the fleet records it describes. What is only partly there is listed in the traceability matrix (rows "FMS reference").

For other programs (administrators) #

  • REST API at /api/v1 (Admin › API and webhooks). Requests carry Authorization: Token <API key> and Account-Token.
    • Each company account has its own account token.
    • A key belongs to a user and can do only what that user may. Keys can be limited to some record types, given a request limit per minute and an expiry, and revoked.
    • Versions are pinned per key.
    • Lists come in pages with a cursor, with filters (filter[status][eq]=Active, updated_at for incremental syncs) and sorting.
    • Bulk create and change of up to 100 records.
    • An Idempotency-Key stops a repeated request from creating a record twice.
    • Attachments, comments, watchers, history and reference lists.
    • Rate-limit headers, and clear error codes.
  • Webhooks. More than 50 events: every record created, changed or deleted, plus issue resolved, work order completed, part low in stock, import finished, inspection overdue and more.
    • Every message is signed with HMAC-SHA256.
    • Updates are merged; failures are retried for 25 hours; after 3 failed messages in a row the webhook is switched off and you are told.
    • Test button, delivery history for 30 days, send again, new secret.
  • Receiving data. Messages pushed to hook.php can be required to be signed. They are answered at once, processed afterwards, never twice. Failures become dead letters you can replay.
  • Integration health. Sync runs and errors, the webhook outbox, inbound messages, the Fleetio sync, and field ownership: who owns each synchronized field, and who wins a conflict.

For everyone #

  • Smart uploads. Drop a maintenance invoice (PDF, photo or text). The program reads the vendor, invoice number, date, vehicle (VIN, unit or plate), odometer, labor, parts, tax, total and its lines. You check and confirm, and it becomes a service record with the invoice attached. The same invoice cannot be recorded twice.
  • Inspection schedules. Every so many days or miles per vehicle; due soon and overdue notices; reset by submitting the form; schedule a form for a whole type or group at once.
  • Fault rules. A diagnostic fault can open an issue with a priority, only notify, or be ignored. Repeats inside a quiet period do nothing more.
  • Charging entries for electric vehicles. They count in the cost reports.
  • Vehicle status history: every status and lifecycle change, from, to, who and when.
  • Disposal and replacement plan on vehicles; reports Lifecycle cost and Replacement planning.
  • Motor pool charges: rates per day, per mile and flat, odometer out and in. Report Motor pool use.
  • Axle configurations: tires only go to positions the vehicle has.
  • Custom records: record types an administrator defines, with checked fields.
  • Watch a record to be told when it changes or gets a comment.
  • Reports show how each KPI is worked out and what data it covers. New reports: downtime, repeat repairs, costs by vehicle type, lifecycle cost, replacement planning, motor pool use, charging, inspection schedules.

Version 4.3.1 (October 2026). Prepared by Franko. Work orders and inventory work together the way they do in Fleetio.

  • Parts leave stock when saved on a work order. Choose the part, its location (the quantity on hand is shown), the quantity, the unit cost (the part's, editable) and the service task. Saving takes it out of that location at once, with an inventory transaction naming the work order. The dialog says what saving will do before you save.
  • The count follows every change. Quantity raised or lowered, location changed, part removed or returned, work order cancelled, reopened or deleted: only the difference goes out or comes back. Completing takes nothing more. The same happens when a part line is edited in the ordinary editor.
  • No inventory adjustment on a part line records the part without touching the count.
  • Not enough at the location: the part is still added, the count goes below zero (red) and it is recorded, as in Fleetio; administrators can choose to refuse it instead.
  • Part page › Work orders: every work order the part is on, with the quantity, location, cost and whether it is out of inventory.
  • Receive purchase orders straight to a work order (To column in Receive…).
  • Admin › Required fields and policies: When it is saved on the work order (as Fleetio) is now the default; When the work order is completed (reserved until then) is still there. Open work order lines that were only reserved can be taken out with Take them out now.
  • Phones: dialogs no longer slide under the top bar and the bottom tabs.
  • Changes to a work order's parts are saved all at once or not at all.

Version 4.3.0 (October 2026). Prepared by Franko. The Fleet OverWatch 4.3 Beta requirements applied to 4.2.11: everything asked for in sections 29 to 36 and "Additional things to add", and the "must have" items of the specification that 4.2.11 did not have yet. What is not in this release yet is listed in the traceability matrix with its status.

New for everyone #

  • Alerts no longer clutter the screen. One small card shows the newest alert with "+N more"; repeats count up (×3) instead of stacking; after six seconds it folds into a bell with the number of new alerts. "Saved" and error replies: at most two, gone after a few seconds. The bell opens every recent alert with Acknowledge (seen, still open) and Resolve (asks how it was resolved); both are shared with the company. Choose All alerts, Critical only or None (count only) for your own pop-ups.
  • Calendars and time lists everywhere. Every date has a calendar button: today is ringed, Today and Clear buttons, keyboard too. Date-and-time boxes have a 24-hour time box with a list of every half hour (00:00, 00:30 … 23:30; the current half hour is marked) and Now. New records start with today's date and the time now (issued, reported, date…), never due or completion dates. A finish before a start is refused.
  • Suggestions and bug reports (Team › Suggestions and bugs): kind, title, description, part of the program, how serious, steps, expected and actual, up to five screenshots. Each gets a reference (FB-000123) and goes to the server administrators. My reports shows the status and their answers; you are told when something changes.
  • Company forum (Team › Forum): a channel per department (Maintenance, Dispatch, Inventory and parts, Safety, Drivers, Finance, Management, General) and Announcements. Topics, replies, photos and documents, search, follow, @mentions. Administrators choose who reads and posts in each channel; administrators and managers pin, lock, hide and handle reported messages (logged). Never visible to another company.
  • Community board (when the service administrators switch it on): one board every account can use, with each person's name and company.

Work orders #

  • Job timers (Time tab, or Start my timer): start, pause, resume and stop per work order or per task. Several technicians time the same job, each with their own entries; billable or not; the cost uses the technician's labor rate. Stopped time becomes the task's labor (or a Labor (job timers) line). Hours typed in by hand are never overwritten (Use the timer hours when you want them). Administrators and managers correct recorded time with a reason, kept in the history. Completing the work order stops running timers.
  • Parts from live inventory: + Add a part searches every number (internal, manufacturer, OEM, supplier, barcode), name and manufacturer, and shows what is available, reserved and where (location and bin), and whether it fits the vehicle. Choose the location and quantity; it is reserved for the job (taken out when the work order is completed) or issued now. A shortage is shown before you add it and follows your inventory rules. return puts unused parts back with a reason. Stock on the open work order refreshes by itself.
  • Photos tab with categories: before repair, diagnostic evidence, parts replaced, repair in progress, completed repair, damage; caption; a phone opens its camera.
  • Driver and vehicle care on the work order: cleanliness, care notes, the driver responsible, driver damage (labelled for the Safety damage page) and operator error.
  • Odometer in miles or kilometres (kilometres are converted; what was typed is kept), engine hours in and out, and a warning when a reading is lower than the last one or far higher than expected.

Vehicles, drivers, records #

  • Vehicle photos (Photos tab of the vehicle): exterior, interior, identification plate, VIN plate, odometer, damage…; the main photo shows in lists and the vehicle profile.
  • Vehicle condition reports: cleanliness and general care (1 to 5), damage the driver caused (opens an issue for the shop), operator errors; with photos. Drivers add their own; managers review and follow up.
  • Required fields (Admin › Required fields and policies): for each kind of record, every field optional, required, required at chosen statuses (for example Cause and Correction before Completed) or required for chosen roles. Administrators and managers can save anyway with a reason (audit log). Imports are not held back.
  • When parts leave the stock count: when the work order is completed (default) or as soon as they are added.

Accounts #

  • A company fleet or just me: the sign-up asks. Just me keeps up with one person's own vehicles (service reminders, repairs, fuel, receipts, photos); it can become a company account later without losing anything.
  • Email confirmation: when the server can send mail, a new account confirms its email address (single-use link, 48 hours) before anyone can sign in.
  • Expired, suspended (billing) and closed accounts are never deleted automatically any more: their people can still sign in, read and export (closed: during the export window).

Imports #

  • Big files import in the background (more than 1,500 rows, or tick Run in the background): you can close the page; progress, Stop, and a downloadable report of the refused rows with their reasons. An interrupted import carries on from its last saved row without adding anything twice; companies take turns. Background imports lists them.

For the server administrators #

  • Plans and switches: a pay wall that is built in and off (plans with limits and included modules, trials, grace period, comped and partner accounts, subscription states set by hand; limits stop new records only, never hide data); read-only mode for every account; kill switches per module; module switches per account; email confirmation; the community board.
  • Health and recovery: checks every minute from cron (database, worker parts, company live data, disk, stale imports, recall check, server helper, backups); each with one permitted action, a timeout, a retry limit and a verification; held after its limit (no restart loops) until you press Resume; everything logged; you are emailed and notified.
  • Backups and restore tests: each backup shows Completed, Verified, Restore tested, Failed or In progress; Verify and Restore test (in a scratch folder that is removed; the live server is never touched).
  • Suggestions and bug reports from every account: prioritise, assign, answer or add internal notes, resolve.
  • The service admin code is kept only as a hash now (it works as before); php worker.php admin-code NEW changes it.

---

Version 4.2.11 #

Version 4.2.11 (October 2026). Prepared by Franko.

New: FleetOverWatch IDs #

  • Every record has its own FleetOverWatch ID: a short code for its kind and its number, for example FO-WO-00012 (work order), FO-V-00340 (vehicle), FO-IS-00087 (issue). It shows at the top of each record, under the kind of record.
  • Records brought over from Fleetio show where they came from next to it: Imported from Fleetio · Fleetio ID 2690741 (at the top, and at the bottom of the Details tab). The Fleetio ID stays with the record so the Fleetio sync and later imports update it instead of adding a copy.
  • Type either ID in a list's search box to find the record.
  • Exports have a FleetOverWatch ID column next to Record ID and Fleetio ID; a file with the FleetOverWatch ID column updates exactly those records when imported.
  • Records the Fleetio sync adds now get FleetOverWatch's own numbering (before, a new record took Fleetio's id as its number when that number was free).

---

Version 4.2.10 #

Version 4.2.10 (October 2026). Prepared by Franko.

Fixed: the Fleetio sync matches the file imports #

The Fleetio sync (Copy from other platforms, or Import and integrations › Fleetio) and the file imports now agree, and can be mixed: records imported from Fleetio's export files carry their Fleetio id, so the sync updates them instead of adding copies.

  • Fuel entries voided in Fleetio are left out (one copied earlier is archived).
  • "No Priority" issues get the priority None.
  • A first sync of a large meter history no longer recounts the vehicle meter after every reading (meters are worked out once at the end).
  • Work orders imported from export files get Fleetio's own lines on the next syncs (up to 300 work orders per pass): the plain tasks from the file are replaced by Fleetio's lines with their labor (and technician), part names, numbers and quantities. A work order whose lines were read is not read again.
  • Purchase orders keep their Fleetio total (fixed in 4.2.9 for both).

---

Version 4.2.9 #

Version 4.2.9 (October 2026). Prepared by Franko.

Fixed: every Fleetio export imports completely #

  • Contacts: Fleetio's Employee yes/no column is no longer taken for the employee number; Employee Number, License State/Province/Region and the full address (street, line 2, city, state, zip) are read; two people with the same name but different Fleetio ids stay two contacts.
  • Archived records (Archived At: former employees, sold vehicles, closed vendors) come in archived (hidden, kept) instead of active.
  • Vehicles: secondary meter, meter date, engine and transmission summary and brand; a vehicle that any import adds gets its year, make, model, type, status, group, VIN and plate from the file, and rows are matched to vehicles by VIN when the name differs.
  • Parts: import without an item type column (Fleetio has none: Replacement part); one row per location gives the stock at each location.
  • Issues: Reported On, Closed On, "No Priority", and the linked work order.
  • Service history: assessment and issues kept in the notes; the work order link.
  • Fuel: entries voided in Fleetio are left out (and the import says how many); litres and kilometres converted; driver, card (last 4 digits only), usage, fuel economy and state read.
  • Meter history: the Fleetio id is read, so importing again does not duplicate; voided readings stay marked void; kilometres converted. A large file imports about three times faster.
  • Purchase orders: Fleetio's status names (Received Full, Received Partial...), the order and received dates, the parts list (in the notes), and the total (it was set to 0 because the export has no lines).
  • Work order line items and sub line items: the Fleetio work order import takes both next to the work order export. Line items become each work order's tasks (with their labor and parts amounts); sub line items become labor lines (technician, hours, rate, cost) and part lines (quantity, unit cost). Rows that Fleetio exports without a work order number are counted and reported, not guessed. Dropping either file on Import data opens the work order import with it in place.
  • Vehicle assignments in Fleetio's import-template layout (contact_name, started_at...) are recognised.

---

Version 4.2.8 #

Version 4.2.8 (October 2026). Prepared by Franko.

Fixed #

  • Fleetio exports import completely. Columns whose headings carry Fleetio's additions were skipped: every date (Issue Date (Eastern Time (US & Canada))), every amount (Total Cost (USD)), the meters (Start Meter, Completion Meter) and the people (first and last name in separate columns). They are now read on every import (Import data, the import wizard and Fleetio work orders): the time zone in the heading is applied, first and last names are joined into Assigned To, Issued By, Reported By, Operator, and a vehicle added by an import gets its year, make, model, type, status, group, VIN and plate from the export.
  • Work order tasks: tasks separated by "|" keep commas inside their names (Brake Hydraulic System Drain, Refill & Bleed was split in two). The work order export's own Labor Hours and Parts Quantity columns are no longer mistaken for line items.

Changed #

  • Import data recognises a work order export with service tasks and offers Use the work order import, which also brings in each work order's tasks, with the file already loaded.

---

Version 4.2.7 #

Version 4.2.7 (October 2026). Prepared by Franko.

New #

  • Copy from other platforms (Maintenance, Admin and Overwatch menus, next to Import data): with an API key, copy a company's data from Fleetio, Samsara, Motive and Geotab into this server. Vehicles, drivers, fuel purchases, Fleetio's work orders, parts, issues, inspections, comments, documents and photos become records here; everything else (hours of service logs, trips, safety events, DVIRs, faults, documents...) is kept as it came, searchable, with CSV and JSON download. Per platform: copy once, or keep in sync every 15 minutes to once a day. Existing vehicles and drivers are matched by id, VIN, email or name instead of duplicated. See Copy from other platforms.

Changed #

  • A new background worker part, transfer, does the copying. It starts by itself after the update; company accounts run it only while a copy is going.

---

Version 4.2.6 #

Version 4.2.6 (October 2026). Prepared by Franko.

Fixed #

  • "Server helper not answering" after an update installed from Admin › Updates and backups: the background worker started by the installer kept the helper's lock, so the helper never ran again (queued updates and backups waited forever). The helper and the installer no longer pass the lock on. Servers that are stuck: see Updates and backups › If this does not work.

---

Version 4.2.5 #

Version 4.2.5 (October 2026). Prepared by Franko.

New #

  • Custom driver pictures: select a truck and press the pencil on the driver row of the details panel to choose how that driver looks: an uploaded photo, one of 16 icons, or initials, each on a colour of your choice. Just me changes it only on your own screens; administrators and managers can also choose Everyone to set it for the whole company. Your own choice wins over the company's, and either one wins over the Samsara or account picture. Use the original (or Use the company picture) puts it back.

---

Version 4.2.4 #

Version 4.2.4 (October 2026). Prepared by Franko.

New #

  • The driver on the live map: selecting a truck shows a clean card above it with the driver's picture, name, duty status and drive time left, and the same at the top of the details panel. When nobody is signed in to the truck it shows the assigned driver (Maintenance > Vehicle assignments) or the last driver; a trailer shows the driver of the truck pulling it. The picture comes from Samsara when its driver records carry one, else from the driver's own account picture (My account), else their initials.
  • Alerts on a phone: one alert at a time under the top bar instead of a stack, with +N for those waiting; a bell in the top bar with the number of new alerts opens the full list.
  • The public home page follows the company theme set by an administrator (Themes): background, text, buttons and the moving grid take the theme's colours. With the built-in dark theme it keeps its own design.

Changed #

  • The phone's top bar holds the menu, the page title, Basic / Advanced, alerts and search; Messages moved into the menu (its count shows on the menu button).

---

Version 4.2.3 #

Version 4.2.3 (October 2026). Prepared by Franko.

Fixed #

  • Company live data "stopped updating": a stuck part of a company account's background worker is now found and restarted every minute (watchdog); company workers restart on the new code after an update; worker.php start and restart on a hosting server act on the companies' workers; the worker started as root switches to the web server user instead of leaving files the website cannot write.
  • The live map note waits three minutes before warning, says restarting while a worker comes back, shows what Samsara answered when it refuses a token, and can be closed (it stays closed until it changes). Admin > Company accounts and worker.php status show stale data, the worker's parts and the last problem in its log.

Improved #

  • Guided tour: points at what each step is about, includes My view, Basic / advanced, Fleetio work orders, part photos, bulk tire stock and data access, lets you jump to any step, works with the arrow keys, and has a phone version (a small card above the bottom bar that folds away, shorter texts, a step for the phone's bottom bar).
  • Basic | Advanced switch: one click under the section name in the menu (or Alt+B, or the button in the phone's top bar) switches the view; the page you are on stays open when it is in both.
  • Phone layout: the top bar shows the page and its section; lists keep search, quick filters and New at the top with the other filters behind Filters; empty fields are left out of the cards; tighter page headers; the demo and company bars take one short row; the menu and record panels no longer slide under them.
  • The public landing page no longer scrolls sideways on 1024-pixel screens.
  • Admin > Updates and backups: uploading an update failed with "Something went wrong on the server (Error)" on servers whose PHP turns shell_exec off. The upload check no longer needs it.

---

Version 4.2.2 #

Version 4.2.2 (October 2026). Prepared by Franko.

New #

  • Work orders from Fleetio's own export files: Maintenance > Fleetio work orders reads Fleetio's work order export and its line items export (or the combined export, one row per line item) with Fleetio's column names, so there is nothing to map. Preview first; Fleetio's totals, dates, labels and invoice numbers are kept; tasks, labor and parts come over; undo with Roll back. See Importing work orders from Fleetio.
  • Photos on inventory items: each part can have pictures, taken with a phone camera or uploaded; the main photo shows in the parts list and on the record. See Parts.
  • Itemized data access: account administrators choose, per role or per person, which information is hidden (costs, revenue, pay, contact details, personal details), which record types are look-only or closed, and which sections are switched off, or start from presets (Driver, Technician, Shop lead, Parts clerk, Dispatcher, Safety manager, Accountant, Viewer without money, Manager). Enforced on the server: hidden information is never sent. See Data access.
  • Bulk tire stock: identical tires counted by size, brand and model at each location; receive (average cost), mount (each mounted tire becomes a tracked tire), issue, transfer, count and scrap, with every movement kept. See Tires.
  • Phone layout: on phones every section has a top bar, a bottom bar with the main pages, a slide-in menu, cards instead of wide tables and full-screen records and forms. See My view and phones.
  • My view (basic) and advanced views: each section opens on the information you picked, shown as number tiles, bar, line or donut charts, lists or tables, saved for your sign-in; Advanced shows the department's full menu.
  • Admin > Updates and backups (server administrators): upload an update file and install it, make a full backup and download one, with your password confirmed, through a root helper that checks every package. See Updates and backups.

Changed #

  • Sections open on My view. Use Basic / advanced in the menu for the full menu (remembered per section in each browser).
  • The installer adds the server helper (/etc/cron.d/fleet-overwatch-helper; leave it out with --no-web-updates) and lets this site's PHP accept uploads up to 64 MB.

Upgrade notes #

Run sudo bash update-4.2.2.sh on the server (this first time from the server, so the helper gets installed); it keeps settings and data and makes a backup first. See Upgrading.

---

Version 4.2.1 #

Version 4.2.1 (October 2026). Prepared by Franko.

New #

  • Public landing page, this User Manual, a new command dashboard, and an interactive demo in a private sandbox per visitor with a guided tour and Reset demo.
  • Company accounts: a company signs up, starts from the sample company or empty, and gets its own Fleet OverWatch on this server with its own users and roles, settings, records and (when allowed) its own Samsara, Fleetio and TomTom keys and live data. Accounts are kept until the administrator closes them. Each account can download a config.json filled from its settings (keys replaced by placeholders) or the blank template. See Company accounts and Managing the demo and company accounts.
  • Hosted service: the home page offers Start your company (signup.php) and Sign in (signin.php); new accounts can wait for the service administrator's approval; accounts can be suspended; each company can have its own address on your domain (CODE.your-domain); worker.php move-to-company moves the server's own fleet into a company account. See Running the service.
  • Hosting platform: worker.php scrub-host removes the server's own company data so the site only hosts company accounts; server administrators sign in at signin.php with the service admin code and land on the service console. Company codes can use letters, numbers and symbols, chosen at sign-up.
  • Branding: each company (and the service itself) can replace the Fleet OverWatch name and logo with its own name, a picture of its name, and a logo (also the browser tab icon).
  • Camera gallery lists only trucks running a Samsara dash cam (trailers and vehicles without one are left out; their Camera tab says so).
  • Pictures: every user can set their own picture in My account; it shows in the account bar, on the dashboard and in the users list.
  • Two-step sign-in for company users, with the company's own policy.
  • Admin > System settings > Config files: Download my settings (current settings with every key replaced by a placeholder).
  • Full backups (backup.sh) with verification and restore (install.sh --verify-backup, --restore), nightly backups and a health check for them.
  • Local NHTSA VIN database installer (install.sh --vpic).
  • Camera gallery; breadcrumbs with one-step Back, browser history and shareable links; unsaved-form protection.
  • Finance data explorer and Overwatch analytics with saved reports and CSV, Excel and PDF exports.
  • Custom fields; hardened attachments; two-step sign-in; diagnostic code library and fault events; issue matrix; asset hierarchy, timeline and merge; deeper inventory (reservations, transfers, cycle counts, requisitions, supplier prices, vendor credits and bills); tires; fuel checks; reservations and pairings; delivery orders; customer and vendor portal; workflow rules; controlled import and export; the assistant; Light, Dark and Iron Man appearance.

Changed #

  • Completing a work order no longer returns the vehicle to Active by itself: return to service is a separate, authorized step.
  • Administrators must set up two-step sign-in at their next sign-in (policy privileged, changeable in the password policy).
  • Settings are in Admin > System settings.
  • backup.sh --no-demo now leaves out only the open demo; company accounts are backed up (consistent database copies). --no-companies leaves them out too.
  • Company demo accounts made before this update become company accounts the first time they sign in: they get a company code, the owner becomes the first user, and they no longer expire unless an administrator sets an expiry.

Upgrade notes #

Run the update script or install.sh; it keeps settings and data and makes a backup first. See Upgrading.

Something here out of date or unclear? Tell your administrator and mention “release-notes” and version 4.9.2.